iM3 Catalogue - Europe - Flipbook - Page 206
iM3 | The Global Name in Veterinary Dentistry
iM3 Control Cut Manual Files
K-Reamers
A D VA N C E D D E N T I S T RY
Used in a clockwise turning movement. K-Reamers are designed to follow
the canal and minimise ledging. K-Reamers have less turns on the active
part than K-files.
H-Files
H-Files or Hedstrom Files, are used in a filing up and down action to file
and shape the root canal. Some specialists prefer H-Files on straight canals.
H-Files are very efficient at removing dentine on the out-stroke, with poor
fracture resistance in rotation.
Steel Files
H-Files and K-Reams that are made from steel have high durability and
reliability. While they have an element of flexibility, it is not as much when
compared with Ni-Ti.
Ni-Ti Files
H-Files and K -Reamers made from nickel titanium or Ni-Ti give them
increased strength and significantly greater flexibility compared
with steel.
ISO Sizes and Lengths
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
0.70
0.80
0.90
1.0
1.1
1.2
1.3
1.4
Files and Reamers are intended to be single use and the cost factored
into each procedure.
80 mm
120 mm
30 mm
Gutta Percha Points and Paper Points share the same ISO Size
Colour coding.
60 mm
30 mm
0.15
31 mm
16 mm
H-Files and K-Reamers from iM3 are available
in four different lengths, meaning we have files
suitable for all sizes of animals from feline to
equine and even large zoo animals. The lengths
listed refer to the overall file length and the
working lengths are 30 mm, apart from 31 mm
files which have a working length of 16 mm.
H-Files and K-Reamers are produced in coloured
coded ISO sizes from 0.15 to 1.4 as follows:
30 mm
www.im3vet.eu