Priess technical cabins - Flipbook - Page 9
COMPONENT CABINETS
POWER SUPPLY
Component cabinets from Priess A/S are used for controls, electrical switchboards,
coils, frequency converters, and more. They are manufactured
in four standard sizes: Type 800, Type 1200, Type 1600 and Type 2000.
ADVANTAGES OF COMPONENT CABINETS
SECONDARY SUBSTATIONS
Like the companies other products, secondary substations from Priess A/S are
characterized by their great versatility. They are used for equipment from the
electricity sector for transforming voltage from 10 kV to 400 V.
ADVANTAGES OF SECONDARY SUBSTATIONS
+ Delivered fully assembled, including foundation and all equipment; in other words,
all cables, 10-kV switchgear, low-voltage switchboard and transformer
+ Agent for several leading electrical components for installation i.a. EFEN and Schneider Electric – which substantially heightens quality
+ Secondary substations are furnished in many different ways, dimensioned
from 200 kVA to 2500 kVA. Standard dimensions from 200 kVA to 1250 kVA
+ Constructed to conform to EN 62271-202 at 20kA for 1 second
Secondary substations are constructed on a frame of profile pipes. Each size is
made up of a frame clad with profiled 1.25-mm aluzinc sheets, a combination of side
elements and a door, or of doors only. The frames are reinforced with angle bars on
both sides of the doors.
The roof is designed as a dual roof with interior gutters at the joints. The interior roof
captures condensation and the gutters carry off any water if a leak should occur in
the roof joint. The roof is removable.
+ Customized dimensions possible
+ Delivered complete, including assembly plate, base and moisture barrier
+ The foundation is made of a 3 mm bent sheet which is subsequently galvanized
+ Also available as a double component cabinet with doors on both sides and a
dividing wall separating the two compartments in the cabinet
For special environments, such as waterfront areas with lots of saltwater
spray, the cabinets are available with seawater-resistant aluminum.
ELECTRICAL & METER CABINETS
Our electrical & meter cabinet merges pump control for sewage and electrical supply
into one product, thus sewage and electricity supply are being combined in one and
the same cabinet.
TECHNICAL CABINETS
Priess A/S has developed a new series of smaller technical cabinets in
standard widths: 400, 500, 700 and 1000 mm. The technical cabinets are suitable
for many different tasks and objectives, but we primarily sell them to the wastewater
and electricity sector.
ADVANTAGES OF TECHNICAL CABINETS
+ Visually appealing design
+ The technical cabinets can be opened easily and expanded in the vertical direction
+ Competitive addition to our well-known component cabinets
There are two alternative mounting plates:
S-line: Mounting plate in aluminum zinc, which is permanently mounted in the
cabinet.
P-line: Removable mounting plate in plastic where all cables and control panels can
be mounted inside the cabinet, before it has been put in place, and the
assembly has been completed.
8
9