Kædefilter

FILTER
.
Filter AKF DAK & WDAK (XL):
The dust/air mixture is fed in the top of the inlet module. Heavy material stays at
the bottom, air and fine dusts are exhausted into the filter bags, where the dust
is extracted, and the air is discharged through the exit in the filter top. The
material is discharged pressure-less out of the filter through a rotary valve via
scrapers in the chain base. The filter bags are continuously cleaned by starting
one regeneration fan in a filter module and flushing the air backwards through
the bags in the module.
Section wall
Rotary valve
Material
Reg. fan
Filtered air
Air & material
Module flushed/cleaned
When calculating filter load, 1 filter module for cleaning
must always be taken into account when calculating the
filter load.
HIGH-END DUST HANDLING SOLUTION
FILTEERS – FANS – DUCTING – SILOS – OUTFEEDERS – CONVEYERS – TRUCKLOADERS - CYCLONES
Aagaard A/S
Smedevænget 14
DK-9560 Hadsund
45 96 53 12 00
mail@aagaard-systems.dk
www.aagaard-systems.dk
Datablad nr.: 0401R17
The regeneration fans can either be time-controlled or started by the differential pressure
gauge. This results in better cleaning and lower energy consumption for filtering. Optimal
cleaning effect is achieved if the filter can run 1-4 times daily off-line cleaning (final cleaning)
where the filter system is shut down.

Paperturn flip book system