LIT-AT100 AIMCO Master Catalog rev 03-01-22 low res - Catalog - Page 112
UTM Series Fastening Counter
Flexible Poka-Yoke for Quality and Line Control
The UTM-1500 Fastening Counter helps you verify that
your assembly procedures are being followed. Parameter
setup is simple and can be programmed at the front
panel or via a PC. The UTM-1500 provides audible and
visual Accept/Reject indications on all rundowns,
ensuring that all your fastening is secure.
FEATURES AND BENEFITS
• For use with tools that have the TM feature installed,
including AIMCO pulse tools, AIMCO angle nutrunners,
AIMCO clutch screwdrivers, and all pistol or lever-start
screwdrivers
• Automatically set up pressure values
• Communication and line control:
— PLC communication inputs (5)/outputs (8)
— Remote parameter switch selection
— Variable relays for interfacing with process
equipment
— Optional network interfaces available
A COMPLETE TURNKEY SYSTEM INCLUDES:
• Qualification of “good cycle”
• New or retrofitted TM tool
PROCESS VERIFICATION
— Retrofit most existing AIMCO tools for
under $200. Contact an AIMCO Customer
Service Associate, 1-503-254-6600, or
toll free 1-800-852-1368.
— Order TM tools by adding “TM” to model
number. (Example: UAT-70 becomes
UAT-70TM)
• Four selectable parameters
• Cycle counting and batch counting
• Programmable timers for detection of double hits,
cross-threads, or premature trigger release
• UTM-1500 Fastening Counter
• Digital Pressure Switch (878-845-1)
• 5 m Sensor Cable (910-831-0) or 10 m Sensor
Cable (910-832-0)
UTM Series Fastener Counters
Model
Voltage &
Frequency
Operational Ambient
Temperature
Operational Ambient
Humidity
UTM-1500A
115 V / 50 Hz
0 – 50º C (non-freezing)
90% RH or less (no dew)
UTM-1500E
230 V / 60 Hz
0 – 50º C (non-freezing)
90% RH or less (no dew)
112
Visit our website www.aimco-global.com
Weight
Dimensions
200 mm x 210 mm x 100 mm
7.9” x 8.3” x 3.9”
200 mm x 210 mm x 100 mm
7.9” x 8.3” x 3.9”
LB
KG
4.5
2.0
4.5
2.0