LIT-AT100 AIMCO Master Catalog rev 03-01-22 low res - Catalog - Page 68
Uryu Controllers
UECP-4810 CONTROLLER
UECP-4810
FEATURES AND BENEFITS
UECP-4810A
• Used exclusively for UDP series tools
• Integrates Tool Driver and UEC-4800 Controller – no separate box
• Windows-based PC software included
USE UECP-4810 WITH THE FOLLOWING TOOLS
• Programmable tool speeds
• Motor setting:
UDP-MC Series
— Motor current can be set in four steps
— Motor rotational speed can be set in 100 rpm increments
• Fastening error detection and fastener number countdown functions
ensure seamless operation
• Allows setup or changeover of fastening torque and fastening
number count
• Tool’s maintenance is possible by counting both total cycle numbers
(how many fasteners) and/or total pulse numbers.
• Input/Output check and error messages can be checked from your
PC or the front panel, which will notify you with a buzzer
• Set up and monitor various control values. Values can be set either
on the front panel or on the PC
• Ethernet (TCP/IP) capable. Upload and receive setting values. Upload
fastening result/waveform data through PC software
UECP-4810(A) System Layout
68
Visit our website www.aimco-global.com