Katalog 2018 - Side 280



Gruppe
13
DEPARTMENT OF EMPLYMENT AND PRODUCTIVITY
FACTORIES ACT 1961
F 87
This form is based on the standard international
form
of certificate approved by the international labour
Test certificate No.8304.
Docks Regulations 1934, regulation 20 (a) (ii) and 22(a)
Shipbuilding and Ship-repairing Regulations 1960, regulation 36(1)
The Construction (Lifting Operations) Regulations 1961, regulations 34 (1) (b)
(This form may also be used for the purposes of sections 26 (1) (e) of Factories act 1961)
Form prescribed by the Secretary of state for
Certificate of test and Examination of Wire Rope
DL Group
(1)
Name and Address of the maker or supplier of the
rope … … … …

… … … …
-1- Crane Wire rope plain ends
Length : 70 mtr.
(2)
(a)
Size of rope in inches (state whether diameter
or circumference)
… … … …

8 mm dia.
(b)
Number of strands
36
(c)
Number of wires pr stand
Lay











(3)
Tensile strength of wire (tons* per sq
(4)
(a)
(b)
(c)
(5)
(6)





6 IWRC

Rh.ord.lay - sZ
insh)

Date of test of sample of rope
… … …
Load at which this sample broke … … …
Safe working load,* subject to any stated
qualifying conditions, such as minimum
pulley diameter, direct tensile load etc.

1770 N/mm2- Galv.
06.12.2005
Min. B/L 4100kp
Name and address of public service, association,
company, firm or person making the test … …
POSITION in public service, association,
company or firm named above of person who
made the test, or
Chief of Department
QUALIFICATION if he is working on his ownA
Account
… … …

… … … …
(1)
I certify on behalf of the firm or persons named
(5)
Signature…………………………………………………….
1 ton=2,240 lbs.
} above, that the above particulars are correct.
}
Delete whichever is not
Date………………………….
Name and address of owner or occupier:
www.danloeft.dk
10
in

Paperturn



Powered by


Fuld skærm Klik for at læse
Paperturn bladre katalog fremviser
Søg
Oversigt
Download som PDF
Udskriv
Indkøbskurv
Fuld skærm
Afslut fuld skærm