Accofluor Selection Guide 2021-3MB - Flipbook - Side 14
PAGE 14
SELECTION GUIDE 2021
MATERIALS
Accofluor materials are well proven and used in various industries and applications – wordwide. Some are wellknown, some are newly developed for special applications or for replace materials to new ones with less environmental impact.
Material code
Description
Application comments
Temp C°
Color
AF-1012
PTFE Virgin
Good for gaseous medias.
-200 to + 260 °C
White
AF-1022
PTFE + additives
Improved wear and friction properties
-200 to +260 0C
Turquise
AF-1024
PTFE + additives
Like AF-1022, but FDA/EU-FCM approved
-200 to +260 0C
Turquise
AF-1086
PTFE + mineral fiber
FDA/EU-FCM approved
-200 to +260 0C
White
AF-1111
PTFE + Ekonol
For high demand reciprocation and rotary
applications at low pressure. Good wear and
temperature resistance also in non-lubricated
environments.
Suitable for soft counter surface ex. aluminium
-200 to +260 0C
Beige
AF-2370
PTFE + special filler
Contact for info.
-200 to +260 0C
Black
AF-2410
PTFE + Carbon
Suitable for low speed rotary applications, also
in poor lubricated environment ex. water
-200 to +260 0C
Black
AF-2413
PTFE + 10% Carbon
Very good for rotary applications, not suitable
for gases
-200 to +260 0C
Anthracite
AF-2426
PTFE + 25% hard
Suitable for lubricated pneumatics and hydraulics applications, very good extrusion resistance
-200 to +260 0C
Black
Black
carbon/graphite
Ideally suited for pneumatics and hydraulics
-200 to +260 0C
both non lubricated and lubricated applications,
very good extrusion resistance and overall chemical resistant except heavily oxidizing agents
AF-3015
PTFE + graphite
Electrical conductive
AF-4025
AF-4115
carbon/graphite
AF-2500
PTFE + 25% soft
-200 to +260 0C
Anthracite
PTFE + 25% glasfiber Acid resistent
-200 to +260 0C
White
PTFE + 15% glasfib-
Used for high speed reciprocating applications,
hard counter surface required
-200 to +260 0C
Grey
er/lubricants
AF-5060
PTFE + 60% Bronze
Hydraulic material for lubricated environment
exceptional dimension stability.
Well proven for static high pressure
-200 to +260 0C
Brown
AF-5640
PTFE + 40% Bronze/
Standard hydraulic material for lubricated environment very good dimension stability.
-200 to +260 0C
Green
additives