Accofluor Selection Guide 2021-3MB - Flipbook - Side 15
PAGE 15
Material code
Description
Application comments
Temp C°
Color
AF-6050
PTFE + stainless
steel
Recommended for valve seats, and static applications
-200 to + 260 °C
Grey
AF-7010
POM C
Improved wear and friction properties
-50 to + 120 °C
White/black
AF-7522
PTFE TFM virgin
Excellent for gaseous medias, good extrusion
resistance
-200 to +260 0C
White
AF-7615
PTFE + mineral/addi- For high demand reciprocation and rotary
applications at medium pressure. Excellent wear
tives and lubricants
and very good temperature resistance also in
non-lubricated environments.
-200 to +260 0C
Dark grey
AF-7710
PEHD1000
-45 to + 80 °C
White
(UHMW-PE)
For high demand reciprocation and low speed
rotary applications at high pressure. Excellent
wear also in non- lubricated environments, low
stick slip effect. Excellent for hydraulic and water applications. Environment friendly solution.
AF-7720
PEHUD
-45 to 120 °C
For high demand reciprocation and low speed
rotary applications at high pressure, more dimension stable at higher temperature. Excellent
wear also in non-lubricated environments, low
stick slip effect. Excellent for hydraulic and
water applications. Good choice for environment
friendly solution. FDA/EU-FCM approved
White/Orange
AF-8160
PUR shore 60D
For lubricated reciprocation applications.
MOCA free acc.to ECHA regulations
-45 to 100 °C
White
AF-8170
PUR Shore 70D
For lubricated hydraulic applications, high
extrusion resistance. MOCA free acc.to ECHA
regulations
-45 to 100 °C
White
AF-9200
Polyester resin and
-40 to +130°C
Turquoise
fabric + PTFE
High flexural strenght, minimum risk of breakage, improved sliding properties and no water
absorption.
AF-9305
PEEK natural
Excellent pressure and extrusion resistance
-60 to 280 °C
Beige
AF-9600
Cotton fabric
High loadbearing capability and low friction
-40 to +130°C
Brown
ATXC-33
PTFE + polymer and
FDA/EU-FCM approved
-200 to + 280 °C
Sand
additives
ATXC-66
PTFE + polymer, addivtes and lubricants
For very high demand reciprocation and rotary
-200 to +280 0C
applications at high pressure. Excellent wear and
temperature resistance also in non-lubricated
environments.
Olive green
Technical data sheets are available on request. The values are based on a routine inspection of raw materials and compounds.