TAG produkt samling - Katalog - Side 48
T
A G TAG HIGH SPEED, CNC PIPE CUTTING
AND BEVELLING MACHINE
RANGE: 2 to 24" (50 - 610mm)
FEATURES
• A high speed pipe cutting and bevelling machine, CNC controlled with simple pre-set programmes
• For high productivity pipeline prefabrication, cutting and bevelling or cutting and double bevelling
simultaneously
• Both front and back hydraulic clamping systems, with automatic self centering
• Built-in automatic recycling coolant system, increasing the life and performance of the tools
• Automatic height up/down adjustment on the pipe conveyor system to set the pipe to the correct
centre height of the machine.
• Independent servo motor driven conveyor to move the pipe backward and forwards to the desired
cut position
• All cutting and bevelling operations are CNC controlled, via simple settings on the touch screen. The
cutting tool will automatically feed into the cut and bevel and will automatically retract at the end
of the cut and bevel. The feed rate of the cutting tools can also be adjusted automatically by the
CNC programme, dependant on the pipe diameter, wall thickness and material.
• The machine can be used for all materials including super duplex, Carbon Steel, Stainless Steel and
alloy Steel pipes, any angle of bevel can be produced such as ‘U’, ‘V’ and ‘Y’.
• High speed cutting and bevelling e.g. 10" x 23mm wall thickness cut and bevelled.
Time: 3 minutes
48
Tel: +44 (0)1869 324 144
WWW.TAG-PIPE.COM
E-mail: sales@tag-pipe.com