Hultafors Range Booklet 2023 - Catalog - Page 47
Stock Code
HULPKGH
Model
PK GH
Precision Knife PK GH
Insulation Knife
Craftsman’s knife with friction grip adapted to work where more precision
is required such as removing burrs on plastic pipes, carving or places with
limited access. The blade is made from Japanese knife steel, 2.0 mm carbon
steel that has been hardened to 58–60 HRC.
A Insulation knife with a 50 mm wide, flexible blade and scale. Its serrated
blade makes it
easy to cut through all types of insulation wool. Grip-friendly handle made
from impact-resistant PP plastic.
• The cutting edge has been sharpened in several stages, with a final honing on
a leather strop.
• The handle is made from super-durable PP plastic and fitted with a Santoprene
friction grip.
• The holster can be attached to both a belt and a button on your work clothes. If
your belt is thick, cut away the small pin on the cover.
• The blade is made from carbon steel.
• A serrated blade makes it easy to cut through all types of insulation wool.
• Both the handle and holster and made from super-durable PP plastic.
Blade length
75 mm
Blade thickness
2 mm
Total length
195 mm
Stock Code
HULFGK
Model
FGK
Qty/pack
10 pcs
• The thin blade has been sharpened to be particularly effective when stripping
cables.
• The holster can be attached to both a belt and a button on your work clothes. If
your belt is thick, cut away the small pin on the cover.
Blade length
35 mm
Blade thickness
1,5 mm
Total length
160 mm
• The cutting edge has a scandi grind for superior sharpness and is easy to
resharpen. A protective electrophoretic deposition coating (EPD) for best rust
protection.
• The extra large handle made from super-durable PP plastic and a long tang
makes the knife very durable and made to withstand rough usage.
• Grinded spine for use of a fire starter.
Qty/pack
10 pcs
Stock Code
HULOK1
Rope Knife RKR GH
Model
OK1
Craftsman’s knife with friction grip and serrated blade that is optimized for
cutting through hard or tough surfaces as well as ropes and strapping bands
especially where tension to the material is applied. The blade is made from
2.0 mm German stainless steel that has been hardened to 57–59 HRC.
Model
RKR GH
Blade length
93 mm
Blade thickness
2 mm
Total length
209 mm
Craftsman’s knife with friction grip and serrated blade that is optimized for
cutting through hard or tough surfaces as well as ropes and strapping band
especially where tension to the material is applied, designed with a dull
point to minimise sharps injuries. The blade is made from 2.0 mm German
stainless steel that has been hardened to 57–59 HRC.
Blade thickness
3 mm
Total length
225 mm
Qty/pack
10 pcs
A durable outdoor knife with friction grip suitable for tough tasks in the
field. The hardwearing textile belt loop allows up to 80mm wide belts and
is equipped with a pocket for a fire starter. The blade has a scandi grind
and is made from Japanese knife steel, 3.0 mm carbon steel that has been
hardened to 58–60 HRC and has a rust protective electrophoretic deposition
coating to withstand corrosion.
• The cutting edge has a scandi grind for superior sharpness and is easy to
resharpen. A protective electrophoretic deposition coating (EPD) for best rust
protection.
• The handle is made from super-durable PP plastic and fitted with a Santoprene
friction grip.
• Grinded spine for use of a fire starter.
Qty/pack
10 pcs
Rescue Knife OKR GH
Blade length
93 mm
Outdoor Knife OK4
• The cutting edge has been sharpened in several stages and 60mm of the blade
is serrated to increase cutting power.
• The handle is made from super-durable PP plastic and fitted with a Santoprene
friction grip.
• The holster can be attached to both a belt and a button on your work clothes. If
your belt is thick, cut away the small pin on the cover.
Stock Code
HULRKRGH
Qty/pack
5 pcs
A powerful and durable outdoor knife with a larger handle suitable for tough
tasks in the field. The hardwearing textile belt loop allows up to 80mm wide
belts and is equipped with a pocket for a fire starter. The blade has a scandi
grind and is made from Japanese knife steel, 3.0 mm carbon steel that has
been hardened to 58–60 HRC and has a rust protective electrophoretic
deposition coating to withstand corrosion.
The thin blade, the sharpening of the blade edge and the design of the handle
has been optimized for cable stripping. The blade is made from Japanese
knife steel, 1.5 mm carbon steel that has been hardened to 58–60 HRC.
Model
EFK
Total length
465 mm
Outdoor Knife OK1
Electrical Fitter’s Knife EFK
Stock Code
HULEFK
Blade length
316 mm
Stock Code
HULOK4
Model
OK4
Blade length
93 mm
Blade thickness
3 mm
Total length
209 mm
Qty/pack
10 pcs
• The cutting edge has been sharpened in several stages, 60 mm of the blade
are serrated to increase cutting power and the tip is blunt.
• The handle is made from super-durable PP plastic and fitted with a Santoprene
friction grip.
• The holster can be attached to both a belt and a button on your work clothes. If
your belt is thick, cut away the small pin on the cover.
Stock Code
HULOKR
46
Model
OKR GH
Blade length
90 mm
Blade thickness
2 mm
Total length
206 mm
Qty/pack
10 pcs
47