Hultafors Range Booklet 2023 - Catalog - Page 57
Pry Bar Aluminium, Demolition
Wrecking Bar Steel 108
A demolition bar with a hollow handle made of specially alloyed aluminium
making it light weight and strong at the same time. The low weight compared
to steel pry bars and burke bars makes it more gentle on the body, which is
especially important when working above shoulder height.
The claw, made from hardened boron steel – is broad and robust but still thin
for the best possible access. The curvature of the claw and the heel allow you
to work at a comfortable position and you don’t have to pry with the handle
pushed all the way down to the ground.
A small, versatile steel wrecking bar that can be used for pulling out nails and
for breaking, scraping and lifting.
• Has three different functions for pulling out nails.
• Can be used for breaking, scraping and lifting.
Art.no.
HUL10815
Model
108/15"
Length
380 mm
Adjustable
No
Weight
650 g
•
•
•
•
Qty/pack
2 pcs
Wrecking Bar Steel 108 MINI
A small, useful steel 7.5” wrecking bar that can be used to pull small nails,
remove wood strips or to open cans.
Art.no.
HUL841054
Model
A 1500 SK
• Has three different functions for pulling out nails.
• Thin contact surfaces make it easy to use in narrow spaces.
Length
1500 mm
Wide claw with nail puller, in hardened, high-alloy boron steel.
Handle made from extremely strong aerospace-grade aluminium.
Aluminium does not rust and withstands cold temperatures better.
The claw and heal is optimised for ergonomic and efficient work.
Weight
3400 g
Material
Aluminium, Steel
Qty/pack
1 pcs
Pry Bar Aluminium, with Steel Point
An aluminium pry bar that also can endure breaking work. The steel point
makes it able to withstand high breaking loads.
Art.no.
HUL108MINI
Model
108 Mini
Length
190 mm
Adjustable
No
Weight
77 g
• Manufactured in ”Aerospace aluminium” for high strength and less flexing.
• Aluminium pry bars are lighter and easier to work with, especially when working
at shoulder height.
• An aluminium tool does not rust, and has better resistance to cold
temperatures.
• It can be bent about three times as much as a steel tool without being
deformed.
• The tip is made of hardened, high-alloy boron steel and will therefore last for a
long time.
Qty/pack
5 pcs
Art.no.
HUL841014
Model
A 1500 SR
Length
1500 mm
Weight
3200 g
Material
Aluminium, Steel
Qty/pack
1 pcs
Pry Bar Aluminium, with Pinch Point
Able to withstand high breaking loads. The bent point prevents you trapping
your fingers close to the floor. Can be used when tear down moulds.
• Manufactured in “”Aerospace aluminium”” for high strength and less flexing.
• Aluminium pry bars are lighter and easier to work with, especially when working
at shoulder height.
• An aluminium tool does not rust, and has a better resistance to cold.
• It can be bent about three times as much as a steel tool without being
deformed.
• The tip is made of hardened, high-alloy boron steel and will therefore last for a
long time.
Art.no.
HUL841024
56
Model
A 1500 SB
Length
1500 mm
Weight
3200 g
Material
Aluminium, Steel
Qty/pack
1 pcs
57