Distinject Equipment - Flipbook - Page 21
13 MM SYRINGES AND CANNULAS
ALUMINIUM SYRINGES
Reusable anodised aluminium syringes for 13 mm projectors.
Can be fully disassembled.
• The complete syringes are supplied disassembled, to permit
greasing the syringe barrel and plunger before use.
• A syringe comprises:
- an anodised aluminium syringe barrel,
- a rubber plunger,
- a stabiliser.
• Must be supplemented with an appropriate injection capsule
(p.20), a cannula (p.21), a PVC rod (code 192328) and silicone
grease (code 192320 p.16) for maintenance.
Code
Model
ANODISED ALUMINIUM SYRINGE
BARRELS
High-quality anodised aluminium syringe barrels for 13 mm
diameter projectors, enabling powerful high-performance
shooting.
Length
Capacity
Code
Longueur
Capacité
192200
Complete aluminium syringe
110 mm
1 mL
192100
Syringe barrel
Model
55 mm
1 mL
192202
Complete aluminium syringe
120 mm
2 mL
192102
Syringe barrel
65 mm
2 mL
192204
Complete aluminium syringe
130 mm
3 mL
192104
Syringe barrel
75 mm
3 mL
192206
Complete aluminium syringe
140 mm
4 mL
192106
Syringe barrel
85 mm
4 mL
192208
Complete aluminium syringe
155 mm
5 mL
192108
Syringe barrel
100 mm
5 mL
192210
Complete aluminium syringe
175 mm
7 mL
192110
Syringe barrel
120 mm
7 mL
192212
Complete aluminium syringe
205 mm
10 mL
192112
Syringe barrel
150 mm
10 mL
192214
Complete aluminium syringe
255 mm
15 mL
192114
Syringe barrel
200 mm
15 mL
FEATHERED STABILISER
AMERICAN WOOL STABILISER
Goose feather stabiliser compatible with 13 mm anodised
aluminium syringes. Stabilises the syringe, allowing accurate
shooting at long range.
American wool stabiliser compatible with 13 mm anodised
aluminium syringes. Stabilises the syringe, allowing accurate
shooting at short to medium range.
Code
Model
Length
Code
192182
Feathered stabiliser
55 mm
192192
Model
American wool stabiliser
YELLOW PLASTIC STABILISER
INJECTION CAPSULES
Yellow plastic stabiliser with metal mouthpiece compatible with
13 mm anodised aluminium syringes. Stabilises the syringe,
allowing accurate shooting at long range.
Capsules with firing pin triggering product injection upon
impact. Positioned in the plunger, placed in the anodised
aluminium syringe barrel.
Supplied by 10.
Code
192194
Code x 10
Model
Yellow plastic stabiliser
Model
Visual code
192290
Injection capsule 1 to 5 mL
•
192292
Injection capsule 7 to 10 mL
••
192294
Injection capsule 15 mL
•••
PLUNGER
PVC ROD
Rubber plunger.
• Grease the piston with silicone grease (p.16) and place the injection
capsule inside before inserting it into the aluminium barrel.
20 cm PVC rod, for greasing the plunger and lubricating the
anodised aluminium syringe barrels with silicone grease (code
192320 p.16).
Supplied by unit.
Code
192180
Model
Code
Model
Rubber plunger
192328
PVC plunger lubricating rod
Additional information p. 17
20
VISUAL
CODE
CAPTURE
www.genia.fr