NEW STAINLESS STEEL GUIDE 2021 2022 forsite - Flipbook - Page 30
Coarse thread
(Pitch = 1.8mm
(approx.)
Sharp tapping threads
ensure lower torque
requirements and mitigate
against user wrist fatigue.
STRUCTURAL
FRAMING STANDING SEAM &
HALTER SYSTEMS STITCHING/
LAPPING
COMPOSITE
SANDWICH PANELS IN
ROOFING AND
WALLS/ CLADDING
CODE
WASHER
DIA.
(mm)
THREAD
LGTH.
(mm)
DRILL CAP.
(mm)
12mm ØD Vulcanised
EPDM with Stainless
steel (AISI 304/ EN
1.4301 (A2))
compression disc
Thread Form -
Coarse thread
(Pitch = 1.8mm (approx.)
SUPPLEMENTARY
INFORMATION
Washer Type -
TEK2
SIZE/NOM.
LGTH (mm)
BOX
A2DH5.5-25-2
5.5 x 25mm
200
2,000
12.0
FULL
0.8-2.5
A2DH5.5-50-2
5.5 x 50mm
200
2,000
12.0
FULL
0.8-2.5
A2DH5.5-60-2
5.5 x 60mm
100
2,000
12.0
FULL
0.8-2.5
W/Washer
TEK® 2 Range
A2DH5.5-80-2
5.5 x 80mm
100
2,000
12.0
FULL
0.8-2.5
BMDH5.5-25-2
5.5 x 25mm
200
2,000
12.0
FULL
0.8-2.5
A2DH5.5-100-2
5.5 x 100mm
100
1,000
12.0
FULL
0.8-2.5
BMDH5.5-38-2
5.5 x 38mm
200
2,000
12.0
FULL
0.8-2.5
BMDH5.5-50-2
5.5 x 50mm
200
2,000
12.0
FULL
0.8-2.5
BMDH5.5-60-2
5.5 x 60mmENGINEERING
100
2,000
12.0
FULL
0.8-2.5
PRODUCT RANGE/ USABILITY DATA
W/O Washer
TEK® 2 Range
DATASHEET
RAINSCREENING
FACADES
BUILDING ENVELOPE
CARTON
Torx 25 female drive
recess
TIMBERS
AND
DECKING
TIMBERS
AND
DECKING
FLAT ROOFING
AND
ETICS SYSTEMS
PRODUCT RANGE/ USABILITY DATA
Drive Type -
ENGINEERING
SPECS
Bi-metal fasteners have
a hardened carbon steel
drilling point (SAE C1022)
brazed to a stainless steel
(AISI 304/ EN 1.4301 (A2))
body and head.
12mm ØD low
profile (3.18mm)
domed head
GYPSUM AND
CEMENTITIOUS BOARDS
TO LIGHT STEEL PARTITIONS
AND TIMBER FRAMES
Thread Form -
Head Style -
HEX NUT
DRIVER
N/A
Fixing
components, brackets
and misc. hardware to
light gauge steel
substrates
ENGINEERING
SPECS
CODE
DATASHEET
SIZE/NOM.
LGTH (mm)
BOX
FIXING TO MASONRY
AND CONCRETE
SUBSTRATES
Washer Type -
Designed For -
FLAT ROOFING
AND
ETICS SYSTEMS
Torx 25 female drive recess
HEX NUT
DRIVER
Drive Type -
Super hard (>55 HRC), super
sharp drilling points ensure
fastest possible drilling
times and reduce
“walking” of point on
substrate surface.
TECHNICAL
DRAWING
GYPSUM AND
CEMENTITIOUS BOARDS
TO LIGHT STEEL PARTITIONS
AND TIMBER FRAMES
12mm ØD low profile
(3.18mm) domed head
TEK 2
FIXING TO MASONRY
AND CONCRETE
SUBSTRATES
Reduced diameter drilling
point ensures highest
possible withdrawal
resistance in thin gauge
steel substrates.
DATASHEET
Head Style -
Fixing components, brackets
and misc. hardware to light
gauge steel substrates where a
low profile or anti-snag
head is required
TEK 2
SUPPLEMENTARY
INFORMATION
Designed For -
2002/95/C
KEY POINTS
CARTON
SPECS
N/A
30
WASHER
DIA.
(mm)
THREAD
LGTH.
(mm)
DRILL CAP.
(mm)
COMPOSITE
SANDWICH PANELS IN
ROOFING AND
WALLS/ CLADDING
2002/95/C
STRUCTURAL FRAMING
STANDING SEAM & HALTER SYSTEMS
STITCHING/LAPPING
A2 Dome-Head Stitching Screws
Bi-Metal TEK 2
(With Washer)
STRUCTURAL
FRAMING STANDING SEAM &
HALTER SYSTEMS STITCHING/
LAPPING
A2 Dome-Head Stitching Screws
Bi-Metal (Stainless Steel) TEK 2
(No Washer)
RAINSCREENING
FACADES
BUILDING ENVELOPE
STRUCTURAL FRAMING
STANDING SEAM & HALTER SYSTEMS
STITCHING/LAPPING
31
Tel: +44 (0)141 647 7100
Fax: +44 (0)141 647 5100
sales@evolutionfasteners.co.uk
www.evolutionfasteners.co.uk
