000387-FATH-New-Products-23-01-EN - Flipbook - Seite 63
FRICTION JOINTS FOR SYSTEM ARMS (SET)
FATH Friction Joints:
Endless possibilities for your assembly workstations
• Fixed friction torque in 6 levels
• Freely adjustable friction torque
• Easy to assemble
• Can be mounted lengthwise,
crosswise and on the front
• Finished system arms can be
adjust multi-dimensionally
Build your swivel arms in individual lengths
and designs with FATH Friction Joints. The
joints feature a permanently set friction
torque that is available in 6 levels. Combine
the different friction torques to adapt your
system arm to your application. Versions
with freely adjustable friction torque are
also available. You can adjust the friction
with a clamping lever or simple
tool
exactly as your application
requires – virtually
continuously from
light to strong.
By a simple turning, the finished system
arm can be adapted multi-dimensionally to
different working positions and workpiece,
product or body sizes.
FIXED & FREE
The axes of the
ADJUSTABLE
FATH Friction
Joints can be
FRICTIONpositioned both
TORQUES
vertically
and
horizontally. This
opens up a wide
range of new possibilities for making tools
and work materials available
in an ergonomic and organized
manner.
2
HIGHLIGHTS
Flexible installation
FATH Friction Joints can be attached to the profile lengthwise, crosswise or on the front. The
sets already contain the installation material for lateral attachment with T-slot nuts in profile slot 8 or 10 as well as for front attachment on a profile piece with an M8 core hole. To reduce a ø 10.2 mm core hole to thread size M8, you can use a FATH Cutting Bush
with Shank 09308801.
For installation on flat surfaces, the supplied slot fixing plates are simply omitted.
63
©2024 | fath24.com