ExhibitView Technical User Guides - Flipbook - Page 17
Courtroom Setup Guide | 17
Initial Setup Instruction
When setting up in the courtroom you must fully be aware of the
sequence for setting up your system. It is not complicated but
critical to a proper setup.
1. Connect the laptop to the projection system
2. Set Windows™ to “Extend”
3. Launch ExhibitView
The above sequence is very important. ExhibitView™ needs the
laptop to be set up in extended view before opening ExhibitView™
so that it can detect the extended screen and the extended screen’s
resolution. Otherwise, exhibits may not display properly.
We recommend that you always do a trial run through in your ofce or
at the courtroom. When you do this, you can use any HDMI TV or any
regular computer monitor as the presentation screen, just like you will
Remember, the size of the monitor or tv is not relevant to a successful
set up. A trial run through ensures you know how to properly set up
and that if anything changes in court, you will know how to correct
Most laptop computers offer VGA connections. Some offer HDMI
connections only and many offer both HDMI and VGA. See the icons
below for identication and connection purposes.