UL Catalog 2022-2023 - Flipbook - Page 192
ELECTRICAL CONDUIT
RIGID ENTRY BOOTS
APT® rigid entry boots allow you to connect electrical conduit to
containment sumps with a significant reduction in installation
time, while also completely removing exposed rubber from the
connection. This durable entry boot requires only a single 2.75"
entry hole for installation, removing the time-consuming
process of drilling multiple holes for fastening purposes.
HIGHLIGHTS
SPECIFICATIONS
• Design requires only a single 2.75" entry hole offering a
significant reduction in installation time.
• Body material: glass-filled nylon
• Features a dual-seal design that will work with either
galvanized or coated conduit.
• Face seal and pipe seal material: Nitrile
• Suitable for use with flat and round sump surfaces and
polyethylene or fiberglass sumps.
• Clamp plate and two gasketed face seal and pipe seal
material: Nitrile seals ensure a watertight connection.
ORDERING INFORMATION
Each size of rigid entry boot utilizes the same body allowing
you to switch out the conduit seal to fit different pipe sizes in
the field if necessary.
• Clamp nut and nut material: glass-filled nylon
• Interior length once installed: 3¼"
Approvals/Certifications
• ULc listed when installed with APT® ULc listed sumps.
Installation
A clamping nut and two clamping seals are used to
compress the fitting into place against the sump wall
simply by tightening it into place, providing a watertight
connection between the boot and the sump surface.
The same method is used to seal the pipe into place
simply by tightening the integrated conduit seal nut.
Model
Description
1
Electrical conduit rigid entry boot
REB-C-0075
¾" rigid entry boot for flat sump surfaces
2
Electrical conduit
REB-C-0100
1" rigid entry boot for flat sump surfaces
REB-C-R-0075
¾" rigid entry boot for round sump surfaces
REB-C-R-0100
1" rigid entry boot for round sump surfaces
408066001
Conduit seal ¾" (replacement)
408066002
Conduit seal 1" (replacement)
408070001
Clamping seal (flat) (replacement)
408072001
Clamping seal (round) (replacement)
408073001*
Plastic adapter for curved sump
(one per rigid boot entry)
*Used to convert a flat sump surface rigid entry boot into a round sump surface
rigid entry boot.
1
192
2