UL Catalog 2022-2023 - Flipbook - Page 81
SPECIFICATIONS
Pump Motor Assembly
Variable Length Range
• Materials: Stainless steel construction including
impellers/diffusers, inlet/outlet, and outer shell
• Power cable: 23' (7 m) black polyethylene jacketed
power cable
Minimum 6" (152 mm)
Diameter Pump Access
Recommended
• 60 Hz pump motor: Two-stage pump with 2" NPT
female outlet
• Motor rating: Continuous operation with motor cooling
provided by product flow and protected from dry running
(A)
Submersible Turbine Pump Kit
• All stainless steel hardware and Viton® or EPDM seals
• Bypass relief valve cracking pressure of 30-40 psi (2.1-2.8
bar) and 4 gpm (15 lpm) minimum flow at the discharge of
all models
• Non-return check valve cracking pressure of 3 psi (0.2 bar)
between product piping and bypass relief valve of all models
• Liquid compatibility: All models are intended for use with
Diesel Exhaust Fluid (DEF). DEF is a non-flammable,
non-combustible liquid that has a specific gravity of 1.09 at
68 ˚F (20 ˚C), and is made per ISO 22241-1 specifications
with 32.5% urea and distilled or deionized water. As defined
by ISO 22241-1, DEF is the same as AUS 32® (aqueous urea
solution) and also commonly known as AdBlue®
3" (76 mm)Bottom Clearance Typical
Variable Length Range (A)
Pump Motor Performance
DEF-PMA150A (Single-Phase) and
Model Length Range
Model Length Designation
69" - 102"
(1,750 mm - 2,590 mm)
VL1
102" - 166"
(2,590 mm - 4,215 mm)
VL2
DEF-PMA150D (Three-Phase)
120
Total Head in Feet
100
80
60
40
20
0
0
10
20
30
40
50
60
70
80
90
Flow in Gallons per Minute (gpm)
Note: Performance is based on pumping water (1 specific gravity). Pressure is taken at the discharge outlet of the pump motor.
AdBlue® is a registered trademark of Verband der Automobilindustrie.
Viton® is a registered trademark of E. I. du Pont de Nemours and Company.
AUS 32® is a registered trademark of GBZI Ltd.
81
SUBMERSIBLE
PUMPING SYSTEMS
• Pump type: All models are 5.1" (130 mm) outside
diameter centrifugal type pump