Corrosion Control System Brochure - Flipbook - Page 3
CORROSION
CONTROL™ SYSTEM
1
The EVO™ Series ATG provides automated
control and monitoring for the entire system
via the Corrosion Control™ Application which
comes standard.
1
4
2
IN-TANK & IN-SUMP CORROSION DETECTION & PREVENTION
Proactively monitor for and remove the main corrosion-causing
elements including water and moisture from diesel tanks and
gasoline sumps with the Corrosion Control™ System. Keep your
system running at peak performance to avoid costly maintenance,
equipment replacement, downtime, and even system failure
caused by excessive corrosion.
2
•
3
•
•
PREVENT TANK CORROSION
The Corrosion Control™ Water Separator provides
proactive in-tank corrosion control by removing diesel tank
bottom corrosion contributors including water and acid.
AUTOMATED CONTROL & MONITORING
The Corrosion Control™ Water Separator is paired with
an EVO™ 600/6000 Automatic Tank Gauge (ATG) to
completely automate operation. From controlling the
Water Separator’s scheduled run time and monitoring
water level to monitoring for a corrosive environment via
the Corrosion Detection Sensor, the ATG handles it all.
KEEP CONTAINMENT SUMPS DRY
The Desiccant Pack acts to absorb humidity within the
containment sump before it turns into corrosion-causing
condensation. The Desiccant Pack Sensor communicates
via the EVO™ Series ATG when the Desiccant Pack(s)
need to be changed to maintain optimal low-humidity.
MONITOR FOR CORROSION
The Corrosion Detection Sensor detects and alerts station
owners to the presence of a corrosive atmosphere in tank
ullage spaces.
CORROSION CONTROL™
WATER SEPARATOR
The Water Separator captures water and acid
from the bottom of the tank – the key causes of
a corrosive environment.
3
•
EVO™ 600/6000 ATGs
CORROSION CONTROL™
DESICCANT PACK AND SENSOR
Absorb humidity and conveniently monitor the
remaining life of the Desiccant Pack(s) installed
within sumps via an EVO™ Series ATG. Efficiently
manage the service intervals to maintain optimal
low humidity and a corrosion-free environment.
7
4
ADVANCED PROTECTION
SUBMERSIBLE PUMP
The Advanced Protection Submersible Pump is
e-coated and contains stainless steel components
to protect the submersible from corrosion.
7
5
MULTIPLEXING
SENSOR HUB™
LOW LEVEL WATER FLOAT
FOR DIESEL
The Low Level Water Float for Diesel provides
enhanced water level detection down to ¼"
delivering earlier indication of the presence of
water inside diesel tanks.
The Multiplexing Sensor Hub™ (MSH)
allows station owners to add the
Corrosion Control™ Water Separator,
Corrosion Detection Sensor, and other
sensors to existing sites without having
to break concrete to run new conduit
and wires.
6
5
6
CORROSION CONTROL™
CORROSION DETECTION SENSOR
The Corrosion Detection Sensor provides ongoing
monitoring of the tank environment, alerting when
corrosion is present in the tank ullage space.