Corrosion Control System Brochure - Flipbook - Page 4
CORROSION CONTROL™
WATER SEPARATOR
The Corrosion Control™ Water Separator provides proactive
in-tank corrosion control by removing tank bottom corrosion
contributors including water and acid.
REMOVE WATER & ACID
The Water Separator removes any water/acid mixture off
the bottom of the diesel tank and separates it from the
clean fuel. The water/acid is collected in the vessel for
disposal while the clean fuel is directed back into the tank.
POWERED BY THE PUMP
The Water Separator uses the flow of fuel created by a
4" FE PETRO® submersible turbine pump to generate
a vacuum which suctions the tank bottom.
EASY MAINTENANCE
The element-free vessel has no filter to change, eliminating
ongoing replacement costs. The collected water/acid
mixture is removed by a service technician, keeping the
tank clear of the harmful corrosion-causing mixture.
LEVERAGE THE POWER OF EVO™
Control and monitoring is provided via an EVO™
600/6000 ATG which automates the separator run
times and lets you know when the vessel is ready to be
emptied. It also monitors for the presence of a corrosive
atmosphere with the Corrosion Detection Sensor.