UL Catalog 2022-2023 - Flipbook - Page 45
ORDERING INFORMATION CONTINUED
Standard ⅓ and ¾ Hp Fixed Speed Submersible Turbine Pumps
Description
STP33-VL1
⅓ Hp fixed speed
Model Length Range Number
VL1
Model Length Range*
55" – 83"
STP33-VL2
⅓ Hp fixed speed
VL2
86" – 147"
STP33-VL3
⅓ Hp fixed speed
VL3
118" – 209"
STP75-VL1
¾ Hp fixed speed
VL1
57" – 86"
STP75-VL2
¾ Hp fixed speed
VL2
88" – 149"
STP75-VL3
¾ Hp fixed speed
VL3
120" – 212"
Model Length Range Number
Model Length Range*
SUBMERSIBLE
PUMPING SYSTEMS
Model
Alcohol-Gas (AG) ⅓ and ¾ Hp Fixed Speed Submersible Turbine Pumps
Model
Description
STPAG33-VL1
⅓ Hp AG fixed speed
VL1
55" – 83"
STPAG33-VL2
⅓ Hp AG fixed speed
VL2
86" – 147"
STPAG33-VL3
⅓ Hp AG fixed speed
VL3
118" – 209"
STPAG75-VL1
¾ Hp AG fixed speed
VL1
57" – 86"
STPAG75-VL2
¾ Hp AG fixed speed
VL2
88" – 149"
STPAG75-VL3
¾ Hp AG fixed speed
VL3
120" – 212"
STPAP33-VL1
⅓ Hp fixed speed with Advanced Protection
VL1
55" – 83"
STPAP33-VL2
⅓ Hp fixed speed with Advanced Protection
VL2
86" – 147"
STPAP33-VL3
⅓ Hp fixed speed with Advanced Protection
VL3
118" – 209"
STPAP75-VL1
¾ Hp fixed speed with Advanced Protection
VL1
57" – 86"
STPAP75-VL2
¾ Hp fixed speed with Advanced Protection
VL2
88" – 149"
STPAP75-VL3
¾ Hp fixed speed with Advanced Protection
VL3
120" – 212"
Notes:
1. STP models are compatible with fuel mixtures containing up to 10% ethanol with gasoline, up to 5% Biodiesel with diesel fuels, and 20% MTBE, 20% ETBE or 17% TAME with gasoline. STPAG/STPAP
models are compatible with fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
2. All models are supplied with a standard check valve unless factory option “R” or “W” is specified.
3. All above models require single-phase, 208-230 VAC, 60 Hz incoming power.
4. 4" riser pipe, if supplied locally, must be 4½" OD by 3/16" WT tubing.
5. For riser pipe lengths 31" to 60", additional charges apply. (Call Customer Service for lead times.)
*Model length (A) defined as the dimension from turbine manifold bottom to pump motor inlet.
Factory Installed Options
Specified in model number at time of STP order.
Model
Description
F
Floating suction adapter, 1½" NPT female, must be factory installed
K
IFS (intake filter screen) factory assembled to pump motor assembly
R
Model R check valve, factory installed, for Veeder-Root® PLLD Line Leak
W
Model W check valve, factory installed, for Red Jacket PPM4000 Line Leak
Field Installed Options
⅓ and ¾ Hp fixed speed specific accessories.
Model
Description
400137908
Syphon check valve, alcohol-gasoline compatible (when ordered with STP)
400818921
STP-CBS, single-phase control box with lockout switch, 120 Volt coil
402312931
STP-DHI + SPGC-220 Guardian Series™ Single Phase Smart Controller bundle
402313921
STP-DHI-CBS, combo DHI with factory-wired STP-CBS
402459931
Model 65 psi check valve AG compatible, (for secondary of manifolded STPs with Veeder-Root® PLLD)
402507930
Secondary syphon kit (when two syphon primes are required for one STP)
5800100220
SPGC-220 Guardian Series™ Single Phase Smart Controller
5800300100
STP-DHI, dispenser hook isolation for 120 Volt dispenser handle switches, up to eight each
45