Habonim Catalog Interactive 2021 V04 070621 - Flipbook - Page 35
The ‘OVAL’ handle
Habonim’s special handle designed to avoid unintentional
movement of the valve handle. It is also used in confined
spaces where the handle must not protrude beyond the valve’s
Face-to-Face plate. To specify a valve with the OVAL handle add
the ‘-OVL’ suffix to the valve code.
The Spring Return Handle (SRH)
An extra thick handle design to withstand the severe impact
during valve closing. This handle is part of the SRH unit.
Habonim’s standard handle for large valves
(2½” and above)
Habonim’s standard handle for large (2½” and above) cryogenic,
high pressure and metal-seated valves, and for large (3” and
above) standard valves. It provides a firm grip and smooth
operation. The maximum force required at the handle-end
to apply the breakaway torque shall not exceed 360 N (80 lbf ).
Habonim supplies valves with 2½” standard port and above for
manual operation with handles attached to or packed with the
valve. (with the exemption of 47 series which is for 3" standard
port and above). If the valve is to be automatically actuated,
Habonim removes the handle and prepares the valve stem
seal accordingly. To specify a valve prepared for automated
actuation, add the ‘-BS’ (bare shaft) suffix to the valve code. The
'-BS' suffix does not apply to valves size up to and including 2.