iM3 Catalogue - Europe - Flipbook - Page 73
iM3 - The Veterinary Dental Company
Introducing iM3 HCR-100, Handpiece Cleaning and Lubrication Unit:
Clean and oil up to three handpieces at once
E-Type fittings for low speed contra angle or nose cone
Two fittings for four- or six-hole high speed handpieces
Adapters included for two-hole handpieces
Easy-to-use three program system: 1-, 1.5- and 2-minute cycle options
Powered by your dental units compressor
Small foot print - 22 cm x 27 cm
Low volume operation
Supplied with 500 ml of MD-500 F1 Lubricating oil (only use MD-500 oil)
Properly cleaned and oiled handpieces have an exponentially longer expected working
life. Ideally, a handpeice should be cleaned and lubricated every five minutes of actual
operating time. With the simple and fast HCR-100 Handpiece Cleaning Unit, it becomes
practical and possible to maintain all your handpieces at peak efficiency.
Assistina 301 Plus Maintenance System
Automatic maintenance at the touch of a button. Perfectly cleaned and lubricated
instrument after only 35 seconds.
Automatic rotational lubrication ensures optimum distribution of oil creating an even
film of lubricant. Instrument lifespan is increased significantly, and service costs are
Lubrication of internal components with service oil through rotation
Optimum cleaning of the spray and air channels with cleaning fluid
Flushing through with compressed air
Requires MD-500 Oil (ST312) and MC-1000 Cleaning Fluid (ST313)
Lubricating handpiece oil for use in the HCR-100 and Assistina 301.
Only use iM3 approved oil in iM3 handpieces.
Warranties invalidated if non approved oil used.
500 ml bottle.
MC-1000 is a cleaning solution for high speed handpieces, straight and contra-angle
handpieces, and air motors. For use with the Assitina 301 Plus.
1 litre bottle.
MC-1000 Cleaning Solution