iM3 Catalogue - Europe - Flipbook - Page 69
iM3 Small Animal Dental Equipment
iM3 Advantage MD-30 Handpiece Oil – 30 ml
• Intelligent oiling and short maintenance intervals equals a longer lifespan
• All synthetic oil specifically designed for the increased workload of
• Contains no toxic constituents, is physiologically harmless
and environmentally compatible
• Safeguards the durability of plastic parts, coatings and seals
• All iM3 Advantage handpieces must be lubricated with MD-30 Oil
F1 Advantage Handpiece Oil - Aerosol
Spray Cap for Four-hole
Spray Cap for E-type
For High Speed and Low Speed Handpieces
For 1:1 SNC LED and Low Speed Attachments
Introducing iM3 HCR-100, Handpiece Cleaning and Lubrication Unit:
All the great advantages of Advantage Handpiece Oil with the added
convenience of a compressed aerosol. Saves time and guarantees that oil
makes it through the entire handpiece in a short spray.
(Spray cap required, sold separately.)
Clean and oil up to three handpieces at once
E-Type fittings for low speed contra angle or nose cone
Two fittings for four- or six-hole high speed handpieces
Adapters included for two-hole handpieces
Easy-to-use three program system - 1-, 1.5- and 2-minute cycle options
Powered by your dental units compressor
Small foot print - 22 cm x 27 cm
Low volume operation
Supplied with 500 ml of MD-500 F1 Lubricating oil
(only use MD-500 oil)
Properly cleaned and oiled handpieces have an exponentially longer expected
working life. Ideally, a handpeice should be cleaned and lubricated every five
minutes of actual operating time. With the simple and fast HCR-100
Handpiece Cleaning Unit, it becomes practical and possible to maintain all
your handpieces at peak efficiency.
Lubricating handpiece oil for use in the HCR-100.
Only use iM3 approved oil in iM3 handpieces.
Warranties invalidated if non approved oil used.
The iPush Tool makes inserting a bur into a push button handpiece a breeze.
iPush Tool, yellow (fits Cat. No L5200S, L5300S, L7100, L7200 and H2050)
For L5200 and L5300
For L5200S, L5300S, L7100 and L7200
Designed and Manufactured by iM3. EC Patent No. 001882788 USA Patent No 29/398937
iPush Tool, black (fits Cat. No L5200, L5300)