iM3 Catalogue - Europe - Flipbook - Page 83
iM3 Small Animal Dental Equipment
Features and Benefits of the iM3 elite Dental Unit
iM3 has developed an air-driven dental suction unit that is fully autoclavable.
The suction tips, handpiece and smooth bore suction tubing can be easily removed
The suction waste is collected in an easily accessible one litre container with a replaceable
filter. A separate foot pedal operates the suction, allowing its use in conjunction with the
high speed drill or three-way air, water, and mist syringe. Because it´s fully autoclavable, it
can also be used in surgery.
Three-way syringe (air, water and mist)
Advantage Low Speed handpiece
LED Advantage Swivel HS Handpiece
The iM3 designed magnetic bur holder prevents burs from falling on the ground.
The burs are held in place right where you need them. The Corian® surface is impervious
to bacteria and easy to clean unlike fibreglass and plastics.
The quality of the handpieces and iM3´s unique features ensure the iM3 elite Dental Unit is
regarded as the number one in the industry. The iM3 elite comes with:
The dental machine chassis is made from aluminium with hospital-grade powder
coating. The unit's control box and components are covered by a full five year warranty.
The iM3 elite, with its built in IEC power board and coolant outlet, allows for the easy
integration of an ultrasonic scaler.
The iM3 elite Dental Unit can be supplied with a height adjustable (50 cm) long reach
(150 cm) pneumatic wall arm. The arm allows the machine to be stored against the wall
and extended to the end of the wet table for use.
The air line and electricity for the dental machine are contained in the arm, removing
unnecessary cables from the ground.
All iM3 machines are fitted with an Advantage Low Speed Motor and Advantage Swivel
4:1 Straight Nose Cone (SNC) for polishing. An array of low speed attachments for rabbit
dentistry, orthopaedics and restorative dentistry are available.
iM3 elite LED with Oil-Free Compressor
iM3 elite LED SW
(Slow speed with water cooling)
Not all automatic handpiece switches are the same! iM3 has developed a pneumatic
switch with no electric parts. The switch removes the need to manually select the high
or low speed handpiece. If it ever needs to be replaced, it can be done in seconds by the
user, which gives peace of mind.