iM3 Catalogue - Europe - Flipbook - Page 58
iM3 Small Animal Dental Equipment
Quick Guide for iM3 Burs
Friction Grip (FG) Burs
Normally used in high speed handpieces. FG burs have a “rounded end” and fit all
standard high speed handpieces. Maximum speed 400,000 rpm.
19 mm long
Right Angle (RA) Burs
22 mm long
These burs have a 22 mm long shank and a small notch at the end of the shank for
locking the bur in place. These burs are commonly used in electric micromotors and low
speed air driven handpieces running between 20,000 - 30,000 rpm. Please note that these
burs do not fit into iM3 high speed handpieces.
Friction Grip (FG) Surgical Length Burs
25 mm long
These burs are 25 mm long and suitable for use in LED Advantage high speed handpieces.
The extra length provides greater access in larger mouths.
Round burs are used for removing bone and drilling holes.
Crosscut Taper Fissure Burs
These burs are used for sectioning teeth.
45 mm long
These burs are suitable for rabbit dentistry and orthopaedics. HP bur shanks are 44.5 mm
long, providing the extra length needed for use in large companion or domestic animals
and exotic animals. HP burs are used in the low speed handpiece fitted with a 1:1 straight
nose cone. These large burs can drill through thick bone for surgical, orthopaedic and
iM3 recommends disposing of dental burs between each patient to reduce turbine wear of the high
FG Plain Round Bur
FG Crosscut Taper Fissure Bur
FG Surgical Length Bur