iM3 Catalogue - Europe - Flipbook - Page 62
iM3 - The Veterinary Dental Company
Quick Guide for iM3 Burs
Friction Grip (FG) Burs
Normally used in high speed handpieces. FG burs have a “rounded end”
and fit all standard high speed handpieces. Maximum speed 400,000 rpm.
19 mm long
Right Angle (RA) Burs
22 mm long
Have a 22 mm long shank and a small notch at the end of the shank
for locking the bur in place. These burs are commonly used in electric
micromotors and low speed air driven handpieces. 20,000 - 30,000 RPM.
Please note that these burs do not fit into iM3 high speed handpieces.
Friction Grip (FG) Surgical Length Burs
25 mm long
These burs are 25 mm long and suitable for use in LED Advantage
high speed handpieces. The extra length provides greater access
in larger mouths.
Round burs are used for removing bone and drilling holes.
Crosscut Taper Fissure Burs
These burs are used for sectioning teeth.
45 mm long
These burs are suitable for rabbit dentistry and orthopaedics.
HP bur shanks are 44.5 mm long, providing the extra length needed for
use in large companion or domestic animals and exotic animals. HP burs
are used in the low speed handpiece fitted with a 1:1 straight nose cone.
These large burs can drill through thick bone for surgical, orthopaedic
and endodontic work.
iM3 recommends disposing of dental burs between each patient to
reduce turbine wear of the high speed handpiece.
Taper Fissure Bur