iM3 Catalogue - Europe - Flipbook - Page 89
iM3 | The Global Name in Veterinary Dentistry
iPush Tool
Cat. Code
The iPush Tool makes inserting a bur into
a push button handpiece a breeze.
iPush Tool, black
L7000
(fits Cat. No L5200, L5300)
iPush Tool, yellow
L7050
Designed and Manufactured by iM3
EC Patent No. 001882788, USA Patent No 29/398937
iM3 HCR-100
HCR101
Introducing iM3 HCR-100, Handpiece Cleaning
and Lubrication Unit:
Handpieces
(fits Cat. No L5200S, L5300S, L7100, L7200 and H2050)
Clean and oil up to three handpieces at once
E-Type fittings for low speed contra angle or nose cone
Two fittings for four- or six-hole high speed handpieces
Adapters included for two-hole handpieces
Easy-to-use three program system: 1-, 1.5- and
2-minute cycle options
Powered by your dental units compressor
Small foot print - 22 cm x 27 cm
Low volume operation
Supplied with 500 ml of MD-500 F1 Lubricating oil
(only use MD-500 oil)
Properly cleaned and oiled handpieces have an exponentially longer
expected working life. Ideally, a handpeice should be cleaned and
lubricated every five minutes of actual operating time. With the simple
and fast HCR-100 Handpiece Cleaning Unit, it becomes practical and
possible to maintain all your handpieces at peak efficiency.
Assistina 301 Plus Maintenance System
ST301
Automatic maintenance at the touch of a button. Perfectly
cleaned and lubricated instrument after only 35 seconds.
Automatic rotational lubrication ensures optimum distribution
of oil creating an even film of lubricant. Instrument lifespan is
increased significantly, and service costs are reduced.
Lubrication of internal components with service oil
through rotation
Optimum cleaning of the spray and air channels with cleaning fluid
Flushing through with compressed air
Requires MD-500 Oil (ST312) and MC-1000 Cleaning Fluid (ST313)
ST312
Lubricating handpiece oil for use in the HCR-100
and Assistina 301.
Only use iM3 approved oil in iM3 handpieces.
Warranties invalidated if non approved oil used.
500 ml bottle.
MC-1000 Cleaning Solution
MC-1000 is a cleaning solution for high speed handpieces,
straight and contra-angle handpieces, and air motors.
For use with the Assitina 301 Plus. 1 litre bottle.
ST313
www.im3vet.co.uk
MD-500 Oil
