iM3 Catalogue - Europe - Flipbook - Page 88
iM3 | The Global Name in Veterinary Dentistry
Cat. Code
iM3 HCR-100
HCR101
Introducing iM3 HCR-100, Handpiece Cleaning
and Lubrication Unit:
Clean and oil up to three handpieces at once
Handpieces
E-Type fittings for low speed contra angle or nose cone
Two fittings for four- or six-hole high speed handpieces
Adapters included for two-hole handpieces
Easy-to-use three program system: 1-, 1.5- and
2-minute cycle options
Powered by your dental units compressor
Small foot print - 22 cm x 27 cm
Low volume operation
Supplied with 500 ml of MD-500 F1 Lubricating oil
(only use MD-500 oil)
Properly cleaned and oiled handpieces have an exponentially longer
expected working life. Ideally, a handpeice should be cleaned and
lubricated every five minutes of actual operating time. With the simple
and fast HCR-100 Handpiece Cleaning Unit, it becomes practical and
possible to maintain all your handpieces at peak efficiency.
Assistina 301 Plus Maintenance System
ST301
Automatic maintenance at the touch of a button. Perfectly
cleaned and lubricated instrument after only 35 seconds.
www.im3vet.eu
Automatic rotational lubrication ensures optimum distribution
of oil creating an even film of lubricant. Instrument lifespan is
increased significantly, and service costs are reduced.
Lubrication of internal components with service oil
through rotation
Optimum cleaning of the spray and air channels with cleaning fluid
Flushing through with compressed air
Requires MD-500 Oil (ST312) and MC-1000 Cleaning Fluid (ST313)
