Bison Product Guide FOOTWEAR Edition 1.2 - Flipbook - Page 7
FOOTWEAR
BISON ICONS AND STANDARDS GUIDE
FOOTWEAR ICONS AND STANDARDS
Manufactured to AS 2210.3:2019.
Oil resistant sole.
Manufactured to EN ISO 20345:2011.
Acid resistant sole.
S1 Anti-Static Footwear.
Heat Resistant Sole capable of withstanding temperatures
not exceeding 150⁰C.
SB P anti-penetration midsole.
Heat Resistant sole capable of withstanding temperatures
not exceeding 300⁰C.
Category SB - Basic requirements of safety footwear.
Water resistant upper (WRU).
SRC - slip resistant soles exceed in both slip resistance
tests in EN ISO 20345:2011.
Energy absorption of Seat (heel) Region (E).
Tested to AS 2210.3:2019 SRB Slip resistant rating
(Stainless steel with glycerine).
Wide fitting footwear.
SB
CERTIFIED PRODUCT
The Benchmark mark is one of the most recognized
symbols of quality and safety.
Electrical Hazard (EH) ASTM F2413-18.
AUSTRALIA & NZ STANDARDS
BISON INNOVATION & TECHNOLOGY
IMFLEX
SDVS™
Most anti-penetration insoles significantly increase the rigidity of
boots. Our Bison XT IMFLEX is a NEW innovative Anti-penetration
insole with thermo forming technology which significantly improves
insole flexibility with the inclusion of flexing ribs allowing the boot to
only flex where it should. The material used in Anti-penetration insoles
are hard under the heel area of the foot, our Bison XT IMFLEX insoles
with new innovation has extra comfort under the heel for better impact
absorption with a 2 layer impact foam design.
SDVSTM (Self Dispersing Venting System) is an innovative self venting
footbed base with breathable lining, to enhance heat dispersion and
reduce moisture.
www.paramountsafety.co.nz / 7