SDS Catalog 2020 12-22-21 - Flipbook - Page 25
DMM Hitch Climber Pulley (Brass Bush)
All pulleys are riveted and tamper proof, we use high strength nickel chrome molly ground steel
spindles, running in pre-lubricated sintered bronze bearings, which are machined after fitting to
the pulley sheave to give the smoothest action possible. Hot forged 2014 T6 aluminum side plates
EXC-PUL100RED
provide strength and durability. Heat treated 174PH stainless steel spindles for high strength and
corrosion resistance. Pre-lubricated sintered bronze bearings for ultra smooth operation
Recommended for arborists and rescue applications. Rapide version incorporates roller bearing
sheave for higher efficiency. Individually marked for traceability. Efficiency Rating = Approx 70%
EXC-PUL100RED
Hitch Climber Pulley (Brass Bush)
Petzl I'D Large Self-Braking Rope Descender
The Petzl D200L0 I'D descender is a new type of descender along the lines of the Petzl Stop. It
includes a mechanical clutch style braking system whereby a large handle is rotated in various
orientations to control whether the unit is in descent, stopped, or complete lock-off. The I'D may
also be used as a belay device or as a fixed brake lower. For ropes between 11.5mm (.45") and 13mm
(.51") in diameter. Lowers heavy loads up to 600 lbs (only for expert users, consult the instructions
PET-D200L0
for use of the device) Certification: EN 341 classe A, CE EN 12841 type C, ANSI Z359.4, NFPA 1983
Technical Use, EAC Individually tested.
PET-D200L0
Petzl I'D Large Self-Braking Rope Descender
Petzl ASAP Lock
The ASAP LOCK mobile fall arrester is designed to facilitate handling during rope ascents. In normal
use, the device moves freely along the rope without any manual intervention and follows the user in
all his/her movements. In case of shock or sudden movement, the fall arrester locks on the rope and
stops the user.
PET-B071BA00
Asap® Lock Mobile Fall Arrester With Locking Function
25
CLIMBING HARDWARE
PHONE 800•438•0671