SDS Catalog 2020 12-22-21 - Flipbook - Page 116
LIVELINE
COVERS
116
Salisbury Self-Securing Cable End Caps
Are used on high voltage distribution cable ends found on vaults, cubicles and substations when cable remains
energized during work. The caps keep moisture and contamination off trimmed cable ends. Cable End Caps are
made from type II orange Salcor® and are rated at 20kV. Cable End Caps must be applied wearing rubber gloves.
SAL-117
SAL-173
SAL-177
SAL-178
Class 2, 1.38" ID X 10" L, 4/0 to 500 MCM
Class 2, .81" ID X 6" L, #4 to 4/0 AWG
Class 2, 2.25" ID X 12" L
Class 2, 3.19" ID X 16" L
SAL-117
Salisbury's Dead End Protectors cover
4.25" and 6" bells or polymer insulators with a skirt diameter of less than 6". Protectors are made from Type II Salcor® with RIB-GRIP®
construction. OR101 has outer ribs to be used with 2" and 2.5" I.D. line hose when using UC2 connector. The smaller, OR114 to be used
to cover transformer bushings up to 4.5" in diameter. OR124 covers polymer insulators up to 4.75" in diameter and 25" overall length
including hardware. Replacement straps for dead end proctors are made of high strength nylon webbing. The replacement straps feed
through slots cut out of the dead end protectors and lock with Velcro-type material. Available in two sizes.
SAL-OR101
SAL-OR114
SAL-OR124
SAL-N24
SAL-N36
Dead End Protector, Class 2, Fits 2-6" Bell Size/1" Line Hose
Dead End Protector, Class 3 Fits 1-4.25" Bell Size/1.5" Line Hose
Dead End Protector, Class 3, Fits 2-4.25" Bell Size/15" Line Hose
Replacement Strap, for 114/124 Series Dead End Protectors
Replacement Strap, for 101 Series Dead End Protector
STE-EC-1
Safety Test's Elbow Cover - 15-25kV
STE-EC-1
Elbow Cover - 15-25kV
SAL-OR124