STE 2021 Catalog - Flipbook - Page 110
LIVELINE
POLE GUARDS
110
Salisbury Pole Guard
Are designed for use in eyelets of insulating blankets when covering energized portions
in hard to cover areas like pad mounts, cubicles, switchboards and substations.
SAL-2856
SAL-2466
SAL-2496
SAL-2851
SAL-2852
SAL-2856
SAL-21936
Pole Guard, 12" X 6'
Pole Guard, 9" X 6'
Pole Guard, Air Gap, 6"X12" Cl4
Pole Guard, Air Gap, 6'X2" Cl4
Pole Guard, Air Gap, 6'x2" CL4
Pole Guard, Class 4, 7"Dia X 2'
Chance's Pole Covers
Tested to ASTM F712. Meet Class 4 requirements. Rated 36.6kV covered-phasedto-covered-phase. Protect personnel when raising or lowering a pole between
energized lines. Cover poles during rubber glove maintenance in confined areas.
High-dielectric linear polyethylene covers will not flash flame. This material will
have some softening without deformation at approximately 170°F, and it will resist
brittleness at temperatures to -50°F. Pole covers are ribbed to reduce cover contact
with the pole, thus minimizing creosote contamination. Nylon button on 49 and 69
lengths allows pole covers to be joined together in tandem, where longer lengths are
required. Rope handles help to easily spread the covers and snap them around the
pole (Rubber gloves must be worn during this procedure). Prolonged contact with an
energized conductor must not be allowed Button-Nut Kit. T4060214 hould be used in
conjunction with conductor covers when raising or lowering poles.
CHN-C4060029
phone: 800.438.0671
CHN-C4060550
CHN-C4060551
CHN-M49371
CHN-M49372
CHN-M49374
CHN-M49376
CHN-C4060029
CHN-C4060030
CHN-C4060000
6" Diameter Pole Covers 48" overall length
6" Diameter Pole Covers 72" overall length
9" Diameter Pole Covers 12" overall length
9" Diameter Pole Covers 24" overall length
9" Diameter Pole Covers 48" overall length
9" Diameter Pole Covers 72" overall length
12" Diameter Pole Covers 24" overall length
12" Diameter Pole Covers 48" overall length
12" Diameter Pole Covers 72" overall length