STE 2021 Catalog - Flipbook - Page 168
UNIVERSAL STICK ATTACHMENTS
168
LIVELINE
Chance All-Purpose Cotter Key Tool
Chance Knocker
Is for pulling and replacing hump-type cotter keys.
Particularly suitable for use on clevis pins and ball
socket insulators. Easy guiding of cotter key provided by
contoured slot and raised eye pin.
Is designed to knock out and pull the cotter keys on fogtype insulators. The Knocker Tool is spring assisted for
greater impact in restricted space and under adverse
working conditions. The Knocker has a standard
universal fitting at one end and a universal fitting with
wing nut on the other to receive cotter key tools.
CHN-M445582
CHN-C4030011
Chance Bolt Head Wrench
Is used on 3/4'' and 5/8'' dia. bolt heads to keep bolt
from turning as nut is being tightened. Extremely useful
on rural ridge pin type construction. The outer edges
on the wrench are tapered, so that they can be wedged
between flanges on channel and bolt head to keep bolt
turning.
Hastings Ball Socket Adjuster
Is used for supporting and aligning ball socket adapter
between ball fitting on disc insulator and clevis fitting on
suspension or strain clamp.
HFG-5455-29
CHN-M445588
Chance Ball Socket Adjuster
Is used on heavy socket clevises particularly where
aluminum suspension and dead-end clamps are
attached to ball and socket insulators.
phone: 800.438.0671
CHN-M445587
Chance Adjustable Insulator Forks
Are designed to grasp 9'' and 10'' disk insulators used
in dead-end construction, will raise most pin type
insulators up to 15 lbs. Fiber jaws open and close by
rotating screws.
CHN-M445567
Hastings Universal Ball Socket Fork
Is used for aligning and holding ball socket fittings for
removal of cotter pin.
HFG-5454-2
Hastings Insulator Fork clamps
Around 10'' disc insulator between porcelain and cap for
removing single unit or holding insulator in alignment as
cotter key is replaced.
HFG-5455-1