STE 2021 Catalog - Flipbook - Page 183
CHN-T4032417
Chance Fiberglass Extension Arms
Are constructed of Epoxiglas®. The extension arms are designed for use on voltages
up to and including 15 kV where reconductoring or insulator replacement is
necessary. The Epoxiglas® Extension Arms can be used on voltages up to 34.5 kV
providing the wireholders are fitted with M48057 insulators. The Extension Arms
are suspended under the crossarm by brackets to enable to conductor to be removed
from the original crossarm and placed in the wireholder mounted on the extension
arm. Standard extension arms (2-1/2" X 6') and conductor holders have a maximum
vertical loading of 150 lbs. per holder. Heavy Duty extension arms (3" X 6') and
conductor holders have a maximum vertical loading of 150 lbs. per holder. Tested per
OSHA & ASTM F711.
CHN-H480072
CHN-C4001310
2 Conductor Holders; Std, Fits 4-1/4" x 6-3/4" Arm
2 Conductor Holders; Heavy Duty, w/ Large Hanger Loop (Fits 6" x 6" Arm)
Hastings Temporary Round Cross Arms
Fiberglass extension arms for composite or wood cross arms. Can be used with both
our Round and Super U Extension Arms. Fits composite or wood cross arms up to 4
1/4= x 6 3/4=. Super U Arm with Large Hanger Loop fits 5 1/4= x 6=. Rubber grippers
won9t damage composite cross arms. Cross arm loop is powder coated to prevent
damage to composite cross arm. Casting trim on end fitting provides protection on
bottom side of composite cross arm. To order arms found on page 307 and page 308
add -F to the catalog number. Retrofit kit available to convert existing extension arms.
HFG-5000-F
HFG-5001-F
HFG-5006-F
HFG-5007-F
HFG-5000-F
183
CONDUCTOR EXTENSION ARMS & TEMPORARY CROSS ARMS
LIVELINE
59 Arm - 2 1/2= Round With 1 Conductor Holder, 11.3 Lbs
59 Arm - 2 1/2= Round With 1 Conductor Holder And Insulator
69 Arm - 2 1/2= Round With 2 Conductor Holders
69 Arm - 2 1/2= Round With 2 Conductor Holders And Insulators
Hastings Pole Mounted Conductor Support Arms
HFG-5038
HFG-5039
HFG-5040
HFG-5041
HFG-5019
HFG-5021
1 Conductor Holder; 15kV, 34" Length, Ratchet Binder
1 Conductor Holder; 34.5kV, 34" Length, Ratchet Binder
2 Conductor Holder; 15kV, 48-1/2" Length, Ratchet Binder
2 Conductor Holder; 34.5kV, 48-1/2" Length, Ratchet Binder
1 Conductor Holder; 34.5kV, 34" Length, Chain Binder
2 Conductor Holder; 34.5kV, 48-1/2" Length, Chain Binder
HFG-5038
www.safetytest.net
Are designed for temporary support of conductors up to 1-1/16" OD. Ideal for
reconductoring single phase and three phase armless construction. Also provides
an excellent means of cross arm support when changing cross arms, hardware and
performing routine maintenance. Constructed of 2-1/2" OD foam filled fiberglass.
Recommended safe working load is 150 lbs. for double conductor holder arms and
200 lbs. for single conductor holder arms. Arms are rated for 15kV or 34.5 kV phase to
phase work applications. Available with ratchet binder and nylon strap or chain type
binder systems. All sections are 100% tested per OSHA and ASTM F-711.