STE 2021 Catalog - Flipbook - Page 186
TEMPORARY CUTOUT & BYPASS TOOLS
186
LIVELINE
Chance's Temporary Cutout Tool
Provides fuse protection during liveline maintenance. The cutout tool clamps onto
primary conductor with a clamp stick/shotgun. The brass stud at lower end accepts
clamp on temporary tap jumper. Insulated bushing and hot parts are from Chance
Type C-Polymer Cutouts: upper contact with integral sleet shield and hooks for
operation by load break tool and lower trunnion of cast bronze. Fuse tube should be
fitted with fuse length rated no larger than 100 amps. Available for 15kV and 27kV
systems. Optional with or without pivot-lever closing device. Pivot-lever permits
closing by hookstick from side opposite the fuse tube.
CHN-PSC6010341
CHN-PSC6010342
Cutout Tool, 15kV
Cutout Tool, 27kV
CHN-PSC6010341
Chance's Temporary Cutout Load Break Tool
This tool provides a temporary means of connecting and disconnecting equipment
or circuits under load conditions. This tool design does not have a fuse and does
not provide protection for fault or overcurrent conditions. Hot parts are identical
to Chance Type C cutouts, including the tubular-copper disconnect blade. The tool
simply clamps onto primary conductor with a Grip-All clampstick. Brass stud at lower
end accepts clamp on temporary tap jumper. An arc-chute-type interrupter gives the
tool its excellent loadbreak capability. To interrupt load currents
CHN-PSC6010347
CHN-PSC6010348
phone: 800.438.0671
CHN-PSC6010342
Temporary Cutout Load Break Tool, 8.3/15kV
Temporary Cutout Load Break Tool,15/27kV
CHN-PSC6010347