STE 2021 Catalog - Flipbook - Page 398
Are available with 1.2'' and 1.65'' jaw opening. Compatible with dies for: Burndy Y35; Alcoa 12A, 12 AC, 12HA, 12HAC; Anderson
HC-12, HC-12H; Thomas & Betts 12-Ton. Operates on open or closed centered systems. No high pressure intensifier required. Relief
valve signals operator when crimp is complete. Head rotates for easy accessibility. Flow Rate: 3-9 gpm. Operating Pressure: 15002500 psi.
GRE-49345
12 Ton, 'U' Type, 1.65" Jaw Opening
Burndy 12 Ton U-Type Hydraulic Crimping Tool
Uses all standard Burndy "U" dies and covers a wide range of applications with its 1.65" jaw opening. Conductor Range: #8-750 kcmil
Al/Cu, #4-556 kcmil ACSR. Visual and audible crimp indicator. Ergonomic handle for improved balance and less fatigue. 350 degree
head rotation. Spring back-up for ram retraction if hydraulic system shuts down. Operates on open or closed centered systems. Flow
Rate: 3-9 gpm. Operating Pressure: 1500-2500 psi.
BNP-LPHY750XT
12 Ton, 'U' Type, 1.65" Jaw Opening
GRE-49345
BNP-LPH750XT
Stanley CT10 Series 12 Ton U-Type Hydraulic Crimping Tools
Are available with a Y-35 and a Y750 Burndy style head. The 1.20" Burndy Y35 head accepts the following dies: Burndy; L, H, Alcoa;
12A, 12AC, 12HA, 12HAC and 30A, Anderson; HC-12 and HC-12H Greenlee; 1985, Huskie; EP410, EP410T, EP430, EP510, EP410HT,
RP410H, EP510H, PDY-1220 and PDY-1216, Thomas & Betts; 12 Ton, Teledyne; TPU-12 BH. The 1.50" Burndy Y750 head accepts
the following dies: Burndy; Y35, Y750 BH, Alcoa; 12A, 12AC, 12HA, 12HAC and 30A, Anderson; HC-12 and HC-12H, Greenlee; 1985,
Huskie; EP410, EP410T, EP430, EP510, EP410HT, RP410H, EP510H, PDY-1220 and PDY-1216, Thomas & Betts, 12 Ton. Capacity: 500
MCM Copper, 636 MCM Aluminum, 556.5 ACSR. Flow Rate: 3-9 gpm. Operating Pressure: 1500-2500 psi.
STH-CT10016N
STH-CT10066AN
12 Ton, Y-35 'U' Type, 1.20" Jaw Opening
Reliable 12 Ton U-Type Hydraulic Crimping Tool
Operates from any 1,500-2,500 psi hydraulic power source. No high pressure intensifier needed. Smaller than many equivalent 12
ton low pressure crimping tools currently available. Crimp up to 750 MCM Copper or Aluminum. Operate on Open- or Closed- Center
systems. Exchange head from 12 ton "U" Style to 12 ton Kearney style without removing from service, using optional adapter and
Kearney style head. 12 ton Kearney Style tool is also available. Crimping head swivels 360 degree on handle. Flow Rate: 3-9 gpm.
REL-LP15
12 Ton, 'U' Type, 1.50" Jaw Opening
12 Ton, Y-750 'U' Type, 1.50" Jaw Opening
REL-LP15
STH-CT10066AN
397
CRIMPING TOOLS
Greenlee LPK1240 12 Ton U-Type Hydraulic Crimping Tools
Fax: 704•482•7349
CRIMPING TOOLS
PHONE 800•438•0671
POWER EQUIPMENT | HYDRAULIC
396