STE 2021 Catalog - Flipbook - Page 405
PHONE 800•438•0671
PRESSES
403
HUS-EP-60W
Slingco Hydraulic Crimping Tools
Huskie Hydraulic Presses
Slingco’s Hydraulic Crimping Tools are designed to crimp sleeves and lugs on ACSR
Are designed to compress sleeves and lugs on ACSR and ACAR transmission and
transmission lines. The Single-Acting Crimping Tool uses hydraulic pressure to advance
Burndy 60 Ton Presses. Available in single or double acting hydraulic advancing
and ACAR transmission & distribution cables using dies that meet the standards of
the utility industry. Our crimping tools are ideal for use in constructing substations &
the ram into position, and an internal spring to return the ram to the original position.
The Double-Acting Crimping Tool advances & returns the ram using hydraulic pressure
alone, eliminating the possibility of the ram sticking or becoming jammed. Our Hydraulic
Crimping Tools (60-ton only) come in a steel carrying case, and are lightweight &
portable. They accept Slingco S60 Dies, or any shell-type dies used with Alcoa or Burndy
60-ton crimping tools.
distribution cables. Ideal for substation construction. Requires an external 10000
psi pumping source. Accepts any shell type dies currently used with Alcoa or
rams. Double acting tools have quicker return times and eliminate the possibility
of the tool jamming. Complete with carrying case, removable die cap for easy
connector positioning, tool stand, and screw type couplers.
HUS-EP-60W
HUS-EP-60D
60 Ton, Single Acting
60 Ton, Double Acting
Slingco’s Hydraulic Crimping Tools Features:
• Accepts Burndy L & Alcoa 6000 Series dies
• Steel Carrying Case
Fax: 704•482•7349
SLI-TCR7018
• Includes Ground Stand
• Lifting eye for hoist work
• For Crimping ACSR and ACAR transmission & distribution cables
SLI-TCR7003
SLI-TCR7018
SLI-TCR08490
60 Ton, Single Acting, Removable Top
60 Ton, Double Acting, Removable Top
100 Ton, Single Acting, Removable Top
Huskie Hydraulic Presses
For full tension, transmission and substation connections and require an
external 10,000 psi pumping source. The EP-100WC will accept shell type dies
currently used with Alcoa 100 ton compression heads. Dies for 200 ton presses
are considered special application and must be engineered to the connector
manufacturers specifications. Consult factory for these dies. Both compression
SLI-TCR08490
heads are double acting and designed to operate from Huskie Tools pump
models R14EAD, HPG-4 or any 3/4 HP highpressure, double acting pump with
the proper oil capacity. Double acting means hydraulically advancing the ram
to build proper tonnage, then the hydraulic pressure is reversed to retract the
ram. This will eliminate all possibilities of the connector hanging up or the tool
jamming.
HUS-EP-100WD
100 Ton, Double Acting
HUS-EP-100WD
PRESSES
POWER EQUIPMENT | HYDRAULIC
402