STE 2021 Catalog - Flipbook - Page 412
PHONE 800•438•0671
Greenlee Hydraulic Long-Reach Chain Saws
Operate with Super Spool selector control for use on open and closed center hydraulic systems. Operating pressure of 1000-2000
psi and a flow range of 5-8 gpm. Cuts hard to reach areas from the aerial basket or from the ground. Insulated fiberglass extension
tubes, tested to meet OSHA Regulation 1910.269. Safety features include: two-step trigger guard, and fully covered sprocket guard.
Anti-kickback chain and automatic chain oiler. Rugged high torque gear motor. 13" cutting capacity. Available in three lengths.
GRE-43178 62.5" OAL
GRE-38568 75" OAL
GRE-43177 88.5" OAL
411
ADI Hydraulic Long-Reach Chain Saws
ADI hydraulic chain saws are the fastest cutting, coolest running, lightest and longest lasting tools available on the market today. The
high torque gear motor develops up to 6 HP, providing the fastest chain speed at a given flow rate compared to any other hydraulic
chain saw. The oval shape of the fiberglass extension tube provides additional strength and allows for flexible hose to be used internally
instead of the fiberglass tubes that our competitors use. ADI chain saws also feature a patented spool system that eliminates heat
generation within the tool. This provides a safety benefit to owners and operators alike and extends the life of the tool.
ADI-00ACS070
ADI-00ACS080
Length: 77" Weight: 8.8 lbs
Length: 88" Weight: 9.5 lbs
Oval Shaped Handle
Stanley Hydraulic Long-Reach Chain Saws
Are ideal for use by right-of-way crews, utilities, parks departments and grounds-keepers. Lightweight, they feature fiberglass poles
for convenient handling in tight spots and automatic chain oiling for long, reliable service. The SN-CS28 is designed for HTMA Type II
circuits and has an optimum flow of 8 gpm/30 lpm. The SN-CS25 is ideal for HTMA Type I circuits commonly found on bucket trucks
where hydraulic circuit flow is often limited to 4-6 gpm /15-23 lpm. For greater versatility, the Stanley “Dual Spool” permits the user
to adjust the saw to operate from either open or closed-center circuits. The SN-CS25/CS28 use a low kickback, .325-pitch saw chain
for added safety. The flow rating is easily changed by replacing the gear chamber and two gears. Both circuit flow systems are available
in 75" and 90" Lengths.
STH-CS25812 Type I, 75" OAL
STH-CS25811 Type I, 90" OAL
STH-CS28811 Type II, 90" OAL
CIRCULAR SAWS & LONG-REACH SAWS
POWER EQUIPMENT | HYDRAULIC
Fax: 704•482•7349
LONG-REACH SAWS
410
Greenlee Hydraulic Circular Saw
Is designed for high production utility line clearing and general tree clearing applications. Super Spool selector control for Open- and Closed-
Center hydraulic systems. Safety features include: hand stop collar, trigger guard, two-step trigger and branch stop. Insulated fiberglass extension
tube, tested to meet OSHA regulation 1910.269. Rugged gear motor angular head design makes flush cuts easier and directs chips away from
the operator. 82" overall length and 9" diameter blade. Operating pressure of 1000-2000 psi and a flow range of 4-6 gpm. 5250 rpm At 6 gpm.
GRE-43180
82" OAL
Stanley Hydraulic Circular Saw Stanley’s
Reliable LR-SERIES Hydraulic Long-Reach Chain Saws
Long reach are intended for safely cutting and trimming trees from the ground or an aerial bucket. The powerful hydraulic drive motor
can easily make cuts up to 13 inches in diameter. Available 62.5, 75 and 88.5 inches, the operator may easily reach areas not possible
with a standard chain saw. The dielectric property of the fiberglass extension tube will reduce the chance of electric shock when used
near an energized electric line. Other features include a trigger guard to prevent accidental movement of the chain, a covered sprocket
guard, and a rubber collar hand stop. A quick set spool can be turned 180 degrees for closed center/open center operations.
REL-LR-75
REL-LR-88.5
75" OAL
88.5" OAL
CR27 circular saw is ideal for use by right-of-way crews, utilities, parks departments and grounds keepers. Blade brake reduces blade coast time
to 2.5 - 5.0 seconds compared to 15 seconds or more for tools without blade brakes. Light in weight, it features a fiberglass pole for convenient
handling in tight spots and a integral motor for long, reliable service. The integral motor and motor yoke create an angled head which gives the
operator more visibility when cutting and allows a more natural work position to minimize fatigue. The new position of the motor in relation to
the handle creates a blade forward position which reduces torque reaction to the operator for added safety, the blade is secured with a unique
double cone-lock nut. The unique trigger guard adds still more safety. If the guard is removed the saw is deactivated. A“Dual Spool” feature
permits the user to operate the saw from either open or closed center circuits. All saws are individually dielectric tested before leaving the factory.
79" overall Length and 9" diameter blade. Operating pressure of 1000-2000 psi and a flow range of 5-7 gpm.
STH-CR27891 79" OAL