STE 2021 Catalog - Flipbook - Page 430
PHONE 800•438•0671
429
Have a double square opening eliminating the use of two sockets. The Utility Sockets will fit hardware which is most common on
utility poles, lag bolts, 'C' clamps, and suspension bolts.
HTM-Z081315S5
HTM-Z081618S5
1/2" Square Drive, Double Square 13/16 x 15/16"
1/2" Square Drive, Double Square 1 x 1 1/8"
Greenlee NR1 Nut Runner Hydraulic Impact Socket
Is a four in one socket tool. The Nut Runner has four common square nut sizes designed for distribution line work. The deep well
accepts up to 6'' in excess bolt length. A 7/16'' hex-quick change adapter is included.
HTM-Z-081315S5
GRE-NR1
GRE-49782
Klein 3-in-1 Nut Runner, Hydraulic Impact Socket
Is available in a Distribution and Transmission version. The 7-3/4" distribution nut runner features three square socket sizes: 3/4”
NR1 (Distribution), 3/4'', 13/16'', 1'', & 1-1/8''
Adapter, NR1 (Distribution)
(also works on 13/16”), 1” and 1-1/8". The 11" transmission version nut runner features three square socket sizes: 1-1/8", 1-5/16"
GRE-49782
and 1-1/2". 7/16" hex quick-change adapter included with each version. Fine tuned ball detent provides improved retention,
minimizing drops.
KLT-NRHD
KLT-NRHDA
KLT-NRHDA3
KLT-NRHDA4
KLT-NRHD
Klein 4-in-1 Square Impact Socket
Fax: 704•482•7349
IMPACT UTILITY SOCKETS
Hydraulic Impact Utility Sockets
Nut Runner; Distribution, 3/4'', 13/16'', 1'', & 1-1/8''
NR Adapter, Distribution, 7/16-Inch Hex Quick-Change Adapter
NR Adapter, Distribution, 7/16-Inch Hex Quick-Change Adapter
NR Adapter, Distribution, 7/16-Inch Hex Quick-Release Adapter
Single-ended impact socket with hands free adjustment between socket sizes. Two coaxial springloaded sockets in one tool. Includes 3/4-Inch, 13/16-Inch, 1-Inch and 1-1/8-Inch square socket
sizes plus a 7/16-Inch hex quick-change adapter Works on 1/2-Inch, 5/8-Inch and 3/4-Inch pole
KLT-NRHDA
hardware 13/16-Inch diameter, 6-Inch (152 mm) long hollow shaft allows use on long threaded
Greenlee NR2 Nut Runner Hydraulic Impact Socket
bolts. Cross hole design to prevent unintentional separation of adapter and socket. Replacement
Is a three in one socket tool. The Nut Runner has three common square nut sizes designed transmission
adapter is available (NRHDA4) Engineered for use with impact drivers.
KLT-NRHD4
construction. The deep well accepts up to 6'' in excess bolt length. A 7/16'' hex-quick change adapter
is included.
Nut Runner; 3/4'', 13/16'', 1'', & 1-1/8''
SHOCKWAVE™ Lineman's 3-in-1 Transmission Utility Socket
GRE-21111 Adapter, NR2 (Transmission) 1-1/2 IN, 1-5/16 IN, 1-1/8 IN
KLT-NRHD4
• More Secure, Efficient Fastening
• 3 in 1 Square Design for Single-Sided Fastening
• For use with 1-1/8", 1-5/16" and 1-1/2" square nuts
• Push and Twist Barrel Lock for secure, one handed size changes.
GRE-21111
• Debris Shield - to resist interior rust and corrosion from dirt, wood chips and moisture on the jobsite
• Includes 7/16" Hex to 1/2" Square Adapter for use with 7/16" quick connect chucks
• Socket features a 1/2" Square Drive
• For use with 3/4", 7/8" and 1" Square Headed Machine Bolts
• Designed for the installation and removal of hardware on utility poles
• Includes 2 Pieces
MLW-49-66-5101
MLW-49-66-5102
Nutdriver, Sw, Distribution 1", 1-1/8", 3/4", Includes Impact Adapter
Nutdriver, Sw, Transmission 1-15/16", 1-1/2", 1-1/2", Includes Impact Adapter
MLW-49-66-5101
(NR2)
IMPACT UTILITY SOCKETS
POWER EQUIPMENT | HYDRAULIC
428