STE 2021 Catalog - Flipbook - Page 453
Anchor Rod Pulling Eye
Provides a large offset eye to accommodate 3 ton chain hoist hooks, and leaves the anchor eye free with plenty of
clearance for attaching guying devices; formed wire grips. The pulling adapter bushing quickly adjusts to fit 1/2'',
5/8'', 3/4'' or 1'' anchor rods. By removing the adapter bushing, the pulling eye fits 1-1/4'' rods. The pulling eye is
Cooper Power System Cumalongs
Have an exclusive wedge-grip action which provides a positive , tight grip on the conductor for non-kinking in-line pulls.
The bronze Cumalongs are easily installed and removed with a tie stick. When the tie stick is removed from the ring,
the safety latch drops over the conductor slot to keep the Cumalong on the conductor. Available in right and left hand
inexpensive and easy to use. Designed for working loads to approximately 6000 lbs.. (18,000 lbs.. ultimate strength).
BTE-PE-1 Anchor Rod Pulling Eye
configurations which enable the lineman to always have the conductor slot facing him. *Cumalongs are not intended for
use with guy wire.
CPS-1833-2
CPS-1833-3
CPS-1833-4
CPS-1833-5
CPS-1833-22
CPS-1833-21
Right Hand, Range: .128" (#8 sol.)- .563" (4/0 ACSR), Max Load 6000 lbs.
Left Hand, Range: .128" (#8 sol.)- .563" (4/0 ACSR), Max Load 6000 lbs.
Right Hand, Range: .258" (#2 sol.)- 1.030" (795 ACSR), Max Load 5500 lbs.
Left Hand, Range: .258" (#2 sol.)- 1.030" (795 ACSR), Max Load 5500 lbs.
Right Hand, Range: .563" (4/0 ACSR)- 1.126" (954 Str.), Max Load 5500 lbs.
Left Hand, Range: .563" (4/0 ACSR)- 1.126" (954 Str.), Max Load 5500 lbs.
Fax: 704•482•7349
BTE-PE-1
CPS-1833-2
451
PULLING EYE
PULLING EYE
PHONE 800•438•0671
RIGGING
450