STE 2021 Catalog - Flipbook - Page 55
Hastings Insulated Platforms
Work platforms are designed for maximum safety and ease of installation. Permanent
non-slip surface in the work area. Metal castings and components on platforms are
made from heat-treated aluminum alloys. Platforms have square channel foot/toe
stops for location awareness. Platform width is 10 3/4=. Twin adjustable struts for
stability. Complete with braces and chain tightener. The rail assembly hinges and
stores on top of the platform by removing the keeper pin. The horizontal rail assembly
is a positioning device that will allow the worker to maintain proper work positioning
and balance. Platform can be positioned in 30 degree increments up to 180 degrees
under load by loosening wheel tightener. No need to get off the board to reposition.
500 LBS load limit.
HFG-8401
HFG-8402
HFG-8403
HFG-8404
55
AERIAL PLATFORMS
CLIMBING EQUIPMENT
HFG-8401
49 Platform With Rail And Pivot Assembly, 72 LBS
69 Platform With Rail And Pivot Assembly, 76 LBS
89 Platform With Rail And Pivot Assembly, 82 LBS
109 Platform With Rail And Pivot Assembly, 86 LBS
Hastings Platform Ladder, 6'
CHN-C4020276
Platform Ladder 6'
CHN-C4020276
www.safetytest.net
Stand or sit at the worksite instead of kneeling on the structure 4 for convenience
and efficiency. Proven products combine in the Chance Platform Ladder: 48"-long
Epoxiglas # Ladder and two 20"-long sections of 10"- wide Platform joined sideby-side constitute a bosun9s chair. Adjustable ladder hooks may be added. Platform
Ladder may be suspended and tagged-off with rope, wire tongs or a combination of
both in order to maneuver a worker into position. For quick rigging and easy storage,
Platform Ladder folds into a neat, compact package. Although the Platform Ladder is
rated for loads to 500 pounds, users must give serious consideration to the capacity of
the point from which it is suspended and the equipment used to suspend it.
" Allows workers to stand or sit at worksite instead of kneeling on structure
" Convenient and efficient
" Proven products combine in Chance Platform Ladder: 48"-long Epoxiglas# Ladder
and two 20"-long sections of 10"-wide Platform joined side-by-side constitute a
bosun9s chair
" Adjustable ladder hooks may be added
" Platform Ladder may be suspended and tagged-off with rope, wire tongs or a
combination of both in order to maneuver a worker into position
" Platform Ladder folds into a compact package for quick rigging and easy storage
" Although rated for 500-lb. loads, users must give serious consideration to capacity
of the point from which it is suspended and the equipment used to suspend it
" For improved footing, three strips of 2= non-skid tape extend the length of the
platform