STE 2021 Catalog - Flipbook - Page 379
Fein JHM USA 101 Electromagnetic Drill Press
Uniform-torque motor for demanding core drilling. High concentricity and positive
slug ejection due to special bore spindle guides. Solid, massive construction in diecast aluminum for work under difficult conditions. Integrated coolant tank. Internal
motor cable routing. Accessory handle for easy carrying of tool. Hand feed wheel
can be mounted on either side. Smart magnet circuitry will not allow motor to start
without sufficient magnetic force.
• Power consumption: 1,050 W
• Power output: 530 W
• Full load speed: 330 rpm
• No load speed: 480 rpm
• Stroke: 2-9/16 [65] in[mm]
• Magnetic holding force: 2023 [9,000] lbs[N]
• Magnetic base dimensions: 6 [152] x 4 [102] in[mm]
• Cable with plug: 12.5 [3.8] ft[m]
• Weight: 31.75 [14.40] lbs[kg]
JNE-JM101
379
DRILL PRESSES
POWER EQUIPMENT - ELECTRIC
Drill Press, JHM USA 101 Electromagnetic
JNE-JM101
Milwaukee Annular Cutters
MLW-49-59-2081
MLW-49-59-2089
MLW-49-59-2094
MLW-49-59-2100
MLW-49-59-2106
MLW-49-59-2113
Annular Cutter, 13/16" X 2"
Annular Cutter, 7/8" X 2"
Annular Cutter, 15/16" X 2"
Annular Cutter, 1" X 2"
Annular Cutter, 1-1/16" X 2"
Annular Cutter, 1-1/8" X 2"
Annular Cutter
www.safetytest.net
Dual alternating tooth geometry and thin-wall construction help Milwaukee’s durable
Annular Cutter cut up to 15% faster. 20% thinner walls, the cutter displaces less
material for the same size hole. Milwaukee’s proprietary high-speed steel with three
hardness zones minimizes breakage and helps the bit last longer. 3/4” Weldon shank
is ideal for use with most small magnetic drill presses and large magnetic drill presses
with the correct arbor. The centering and ejecting pin (included) is compatible with
all 2” depth cutters.
Specifications:
• Shank: 3/4" Weldon
• Pack Qty: 1
• Type: Annular & Carbide Cutters
• Diameter: 13/16"
• Depth: 2"
• Material: High Speed Steel
• Coating: Black Oxide
• Available Sizes: 1/2", 9/16",5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16",
1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-9/16", 1-5/8", 1-11/16",
1-3/4", 1-13/16", 1-7/8", 1-15/16", 2"