STE 2021 Catalog - Flipbook - Page 415
415
CRIMPING
POWER EQUIPMENT - HYDRAULIC
Huskie HUS-EP-510H 12 ton C-type Remote Hydraulic Crimping Head
Has a rubber boot cover and a 1.65'' jaw opening. The remote head requires an
external 10,000 psi pumping source. Accepts all "U" type dies, splices up to 600 MCM,
and lugs up to 750 MCM. Comes complete with 3/8" male, screw type coupler and
carrying case.
HUS-EP-510HC
12 Ton, 'U' Type Remote Head, 1.65" Jaw Opening
HUS-EP510HC
Huskie HU-EP-510HK 12 Ton Kearny Style Remote Hydraulic
Crimping Head
Has a rubber boot cover and a 1-1/2'' jaw opening. The remote head requires an
external 10,000 psi pumping source. Accepts all Kearny WH-2, PH-2, WH-3 type dies.
Comes complete with 3/8" male, screw type coupler and carrying case.
HUS-EP-510HK
12 Ton, Kearney Style Remote Head, 1-1/2" Jaw Opening
HUS-EP-510HK
Huskie HU-EP-610H 15 Ton C-type Remote Hydraulic Crimping Head
With a 2" jaw opening. The remote head requires an external 10,000 psi pumping
source. Accepts all Burndy "P" Type and Huskie HT-61 Series dies used in the Y-46
Tools. When used with a Huskie PU-15 die adapter it will accept all "U" Type dies used
with any 12 Ton tool. This tool is primarily used for cables above 750 MCM or in cases
were additional tonnage is required to compress larger lugs, terminals, and sleeves
on tension connections. It is almost always used on larger underground cables up to
1000 MCM. Comes complete with 3/8" male, screw type coupler and carrying case.
HUS-EP-610H
HUS-EP-610H
15 Ton, 'U' Type, Remote Head, 2" Jaw Opening
With a 2'' jaw opening. The 360° rotating remote head requires an external 10,000
psi pumping source. Accepts "P" style (Y-46) dies to easily crimp connector sizes up to
1250 MCM-CU. Also accepts "U" type (Y-35) dies with the use of a PU adapter.
REL-46
15 Ton, 'U' Type, Remote Head, 2" Jaw Opening
REL-46
www.safetytest.net
Reliable RL-REL-46 15 Ton C-type Remote Hydraulic Crimping Head