STE 2021 Catalog - Flipbook - Page 424
LONG-REACH SAWS
424
POWER EQUIPMENT - HYDRAULIC
EME-43178
Greenlee Hydraulic Long-Reach Chain Saws
Operate with Super Spool selector control for use on open and closed center hydraulic
systems. Operating pressure of 1000-2000 psi and a flow range of 5-8 gpm. Cuts
hard to reach areas from the aerial basket or from the ground. Insulated fiberglass
extension tubes, tested to meet OSHA Regulation 1910.269. Safety features include:
two-step trigger guard, and fully covered sprocket guard. Anti-kickback chain and
automatic chain oiler. Rugged high torque gear motor. 13" cutting capacity. Available
in three lengths.
EME-43178
EME-38568
EME-43177
62.5" OAL
75" OAL
88.5" OAL
Stanley Hydraulic Long-Reach Chain Saws
Are ideal for use by right-of-way crews, utilities, parks departments and groundskeepers. Lightweight, they feature fiberglass poles for convenient handling in tight
spots and automatic chain oiling for long, reliable service. The SN-CS28 is designed
for HTMA Type II circuits and has an optimum flow of 8 gpm/30 lpm. The SN-CS25
is ideal for HTMA Type I circuits commonly found on bucket trucks where hydraulic
circuit flow is often limited to 4-6 gpm /15-23 lpm. For greater versatility, the Stanley
“Dual Spool” permits the user to adjust the saw to operate from either open or closedcenter circuits. The SN-CS25/CS28 use a low kickback, .325-pitch saw chain for added
safety. The flow rating is easily changed by replacing the gear chamber and two gears.
Both circuit flow systems are available in 75" and 90" Lengths.
STH-CS25812
STH-CS25811
STH-CS28811
Type I, 75" OAL
Type I, 90" OAL
Type II, 90" OAL
STH-CS25812
phone: 800.438.0671
Reliable LR-SERIES Hydraulic Long-Reach Chain Saws
Long reach are intended for safely cutting and trimming trees from the ground or
an aerial bucket. The powerful hydraulic drive motor can easily make cuts up to 13
inches in diameter. Available 62.5, 75 and 88.5 inches, the operator may easily reach
areas not possible with a standard chain saw. The dielectric property of the fiberglass
extension tube will reduce the chance of electric shock when used near an energized
electric line. Other features include a trigger guard to prevent accidental movement of
the chain, a covered sprocket guard, and a rubber collar hand stop. A quick set spool
can be turned 180 degrees for closed center/open center operations.
REL-LR-75
REL-LR75
REL-LR885
75" OAL
88.5" OAL