STE 2021 Catalog - Flipbook - Page 529
529
CURRENT & VOLTAGE DETECTORS
TEST INSTRUMENTS
Salisbury Voltage Detectors
Are used to verify live or de-energized conductors. These testers may be used with
rubber insulating gloves or hot sticks using the splined universal end fitting. Testers
indicate the presence of voltage with an extra bright LED light and a distinctive
audible signal. It is recommended that the tester be moved closer to conductor until
warning is indicated, or it touches conductor, apparatus, or test point. Test the unit
on a nearby energized conductor. Detectors are available in two ranges: 240V-230kV
and 240V-500kV. Kit includes detector, case and shotgun adapter. Each tester requires
three āCā batteries (included).
SAL-4244
SAL-4356
SAL-4344
SAL-4367
SAL-4244
Detector; 240V-230kV
Kit; 240V-230kV
Detector; 240V-500kV
Kit; 240V-500kV
Bierer AV-40 Voltage Indicator
Provides an audible and visual alarm to indicate the non-contact presence of voltage,
with an operating range from capacitive test points / secondary voltage to 40kV (Line
to Ground). Activation threshold meets ASTM requirements. Can be used as a stand
alone voltage detector without second probe. Underground & overhead applications.
Calibrated threshold is minimum approach distance for each overhead setting. Meter
assembly is over voltage protected. Incidental direct contact will not damage the unit.
Watertight construction. Super bright LEDs and ultra loud horn. Built in test position.
Standard universal/grip-all adapter is included with every unit. Includes a universal/
grip-all, instruction manual and a storage bag.
BIE-AV40
BIE-AV40
AV40 Kit
Provides an audible and visual alarm to indicate the non-contact presence of
voltage. Detects 0 to 300kV Line to Ground (0 to 500kV Phase to Phase). Activation
threshold meets ASTM requirements. Can be used as a stand alone voltage detector
without second probe. Underground & overhead applications. Calibrated threshold
is minimum approach distance for each overhead setting. Meter assembly is over
voltage protected. Incidental direct contact will not damage the unit. Watertight
construction. Super bright LEDs and ultra loud horn. Built in test position. Standard
universal/grip-all adapter is included with every unit. Includes a universal/grip-all,
instruction manual and a storage bag.
BIE-VIAV-300
AIAV300 Kit
BIE-VIAV300
www.safetytest.net
Bierer VIAV-300 Voltage Indicator