STE 2021 Catalog - Flipbook - Page 531
531
PENTA ESP Electric Voltage Detectors
These voltage detectors are designed for “proving dead”, making sure that nominal
voltage is actually absent on a circuit in an HV transmission system between 50 kV
and 765 kV (no-voltage verification): The device will detect any nominal voltage on
over head lines and stations. It will avoid detecting most induced voltages in order to
allow grounding operations.
• Optimised indication that can be understood clearly in all working conditions:
• The visual indication is visible in all usual working environments, in sunlight or fog,
with a wide angle of visibility and from the side thanks to an optic ring.
• The 100 dB sound signal is designed to remains audible even in traffic or strong
wind, thanks to its acoustic “horn”.
Direct access to the battery and sealed electronics compartment. When the battery is
replaced, this design prevents the following:
• Accidental interchange of housing or circuitry;
• Damage to electronic circuits;
• Humidity ingress into the device when the battery is replaced outdoors.
PTA-HVD1-GNG-C060220XHUC-PTA
PTA-HVD1-GNG-C220500XHUC-PTA
PTA-HVD1-GNG-C069230XHUC-PTA
PTA-ADVECU
PTA-ADVECUCR
PTA-HVD1-GNG-C060220XHUC-PTA
CURRENT & VOLTAGE DETECTORS
TEST INSTRUMENTS
Range customizable from 50 to 500 kV
HVD1 High Voltage Detector 60 to 220kV
HVD1 High Voltage Detector 220 to 500 kV
HVD1 High Voltage Detector 69 to 230 kV
Replaceable Adaptor For Different Sticks End Fitting
Replaceable Adaptor For Different Sticks End Fitting
PTA-ADVECU
PTA-ADVECUCR
HD Electric TAG 200 Electronic Voltage Detectors
Is an electronic voltage detector designed for detecting both distribution and
transmission voltages. These direct contact type detectors emit both audible and
visual indications when placed in contact with an energized conductor. TAG's are
designed for overhead applications, but can be adapted for underground use with
optional underground bushing probes. Polycarbonate housing for heavy field use.
Water resistant. All-Check self testing system. No on/off or range selector switches.
Built-in universal spline for hotstick attachment. 9V alkaline battery operated.
Carrying case included.
TAG 200
URD Probe
www.safetytest.net
EME-TAG-200