STE 2021 Catalog - Flipbook - Page 112
LIVELINE
COVERS
112
SAL-117
Salisbury Self-Securing Cable End Caps
Are used on high voltage distribution cable ends found on vaults, cubicles and
substations when cable remains energized during work. The caps keep moisture and
contamination off trimmed cable ends. Cable End Caps are made from type II orange
Salcor® and are rated at 20kV. Cable End Caps must be applied wearing rubber
gloves.
SAL-117
SAL-173
SAL-177
SAL-178
Class 2, 1.38" ID X 10" L, 4/0 to 500 MCM
Class 2, .81" ID X 6" L, #4 to 4/0 AWG
Class 2, 2.25" ID X 12" L
Class 2, 3.19" ID X 16" L
Salisbury's Dead End Protectors cover
SAL-OR124
4.25" and 6" bells or polymer insulators with a skirt diameter of less than 6". Protectors
are made from Type II Salcor® with RIB-GRIP® construction. OR101 has outer ribs
to be used with 2" and 2.5" I.D. line hose when using UC2 connector. The smaller,
OR114 to be used to cover transformer bushings up to 4.5" in diameter. OR124 covers
polymer insulators up to 4.75" in diameter and 25" overall length including hardware.
Replacement straps for dead end proctors are made of high strength nylon webbing.
The replacement straps feed through slots cut out of the dead end protectors and lock
with Velcro-type material. Available in two sizes.
SAL-OR101
SAL-OR114
SAL-OR124
SAL-N24
SAL-N36
Dead End Protector, Class 2, Fits 2-6" Bell Size/1" Line Hose
Dead End Protector, Class 3 Fits 1-4.25" Bell Size/1.5" Line Hose
Dead End Protector, Class 3, Fits 2-4.25" Bell Size/15" Line Hose
Replacement Strap, for 114/124 Series Dead End Protectors
Replacement Strap, for 101 Series Dead End Protector
STE-EC-1
Safety Test's Elbow Cover - 15-25kV
phone: 800.438.0671
STE-EC-1
Elbow Cover - 15-25kV