STE 2021 Catalog - Flipbook - Page 532
Bierer PD800W Cordless Phasing Tester
Accurately and easily operates in multiple applications including phasing, voltage detection, phase sequencing and phase angle
indication. Exclusive, FCC licensed wireless technology of the PD800W cordless phasing tester. Designed for three-phase secondary
systems, capacitive test points, URD systems and overhead and transmission/substation systems. Operates like a conventional phasing
tester, but does not require an interconnecting cable or extension resistors. Each probe is water resistant and is completely shielded to
minimize stray field interference. Easy-to-Read digital display with backlight and high intensity LED lights.
• Meter Probe Can be used as a Voltage Detector Showing
Approximate Voltage, in the URD or OH Position, or with
Reference Probe up to 69kV to Ground
• Cordless Phasing Tool Direct Contact from 120V - 69kV,
Distribution Systems
• Cordless Phasing Tool (Degree Position Only) Non-Contact
from 69kV - 800kV, Transmission/Substation Systems
• Phase URD Systems
• Phase Capacitive Test Points on URD Elbows
• Phase by Using the Phase Sequence Indicator Lights in
URD and OH Positions
• Phase Angle Indicator, Showing Actual Phase Angle
Relationship in Degrees, in the Degree Position
• Automatically Alerts User of a Delta/Wye Transformation
by an Indicator Light Blinking
Reference Probe
• Can be Used to Tie Utility Systems and Cogeneration
Bierer Phasing Ranger 1
Is a revolutionary phase identification device. No other phase identification device
is easier to use when it comes to determining actual phase relationship in the field.
All readings are Real Time readings, there are no calculations to be made or data to
be transferred from one location to another.
This Smart Grid Technology requires a One Time set-up procedure and then allows
the user a permanent and reliable means of phasing, phase ID, mapping and tagging
or general troubleshooting.
The complete Phasing Ranger 1 kit comes complete with a Send Unit, Receive Unit,
Meter Probe, Auto Answering Device, GPS receiver, Trac-Fone, all of the necessary
cables, one straight probe (BIE-81280LPM), one hook probe (BI-81280LHM),
instruction manual and two durable padded carrying cases (BI-PD800B).
BIE-PR1COMP
Phasing Ranger Kit
Plants Together
• Operating Range of 100ft.
• Kit is Stored in a Highly Durable Carrying Case Padded
with Foam Reference Probe and Meter Probe have a fiveposition selector switch that controls different operating
modes.
Phase Ranger
• OFF - Power off for storage
• DEG - For phase angle measurements from 208V to 800kV
• URD - For phasing and voltage detection on Underground
Rural Distribution systems from 4Kv - 35Kv.
• OH - For phasing and voltage detection on overhead
systems from 4kV - 69kV
• TEST - Tests internal meter circuitry and displays battery
voltage
Each kit contains a Reference Probe (Transmitter), Meter Probe (Receiver),
one straight probe adapter (BI-81280LPM), one hook probe adapter (BI-
81280LHM), instruction manual, all stored in a padded case (BI-PD800B).
BIE-PD800W
BIE-PD800W 800kV Cordless Phasing Tester
BIE-PR1COMP
Meter Probe
531
VOLTAGE PHASING METERS
VOLTAGE PHASING METERS
PHONE 800•438•0671
TEST INSTRUMENTS
530