Visit Installers guide EN - Flipbook - Sida 70
VISIT ACCESSORIES
Bed shaker
BE1270
Flash receiver wall bracket
BE9075
Using a flash receiver
Connections
Anti-slip surface
Portable receiver
Flash receiver
BE1441
1 Use the drilling template to mark and drill holes for the screws and plugs.
2 Remove the flash receiver table stand using the Allen key.
3 Fit the wall bracket on the wall. Attach the bottom and mount the flash receiver on the wall bracket.
1
Vibrating pad
Pager charger
Using a flash receiver with battery backup
Function
Dimensions and weight
Compatibility
BE1442
Wakes you with vibrations under
the pillow or mattress. Requires no
internal battery and connects to all
Visit receivers, charger accessories and
stand alone alarm clocks.
Height: 88 mm, 3.5"
The bed shaker can be connected
to the following products and
accessories:
1 Use the drilling template to mark and drill holes for the screws and plugs.
In the box
BE1270 bed shaker
Width: 88 mm, 3.5"
Depth: 27 mm, 1.1"
Weight: 120 g, 4.2 oz.
BE1260 Pager charger accessory for
the BE1470 Visit pager receiver
Environmental requirements
BE1350 Alarm clock classic
For indoor use only
BE1370 Alarm clock pro
Power consumption
Temperature: 0° to 35° C, 32° to 95° F
Operating voltage
2.0 – 4.0 V DC from a Visit receiver
Relative humidity: 15% - 90%,
non-condensing
Power consumption
250 – 750 mA
Maintenance and care
Cables and connectors
Cable length: 2 m, 6.5'
Connector: 3.5 mm mono jack plug
3
Wrist receiver
Technical specifications
69
2
Clean with a dry cloth
Do not use household cleaners,
aerosol sprays, solvents, alcohol,
ammonia, or abrasives
2 Remove the screw marked in red, located at the bottom of the flash receiver.
3 Fit the wall bracket on the wall. Re-attach the screw to mount the flash receiver on the wall bracket.
1
2
3
BE1441 Visit flash receiver
BE1442 Visit flash receiver with
battery backup
BE1450 Visit portable receiver
BE1570 Visit wrist receiver charger
BE1580 Visit alarm clock
70