Visit Installers guide EN - Flipbook - Sida 73
VISIT ACCESSORIES
Magnetic switch
Contact mat
Monitors the door and window
Signals when someone steps on it
Mount the magnetic switch on the door or window frame and
connect it to the telephone transmitter. When the magnets are
separated, the transmitter signals the Visit receiver.
Place the contact mat by the front door or by the bed and
connect it to the telephone transmitter or baby monitor to
be alerted when someone enters a room or leaves the bed.
Technical specifications
Technical specifications
Dimensions
256213 mm, 1"2.5"0.5"
Dimensions
5403954.6 mm, 28"15"0.1"
Weight
25 g, 0.9 oz.
Weight
255 g, 9 oz.
Connector
3.5 mm mono jack plug
Connector
3.5 mm mono jack plug
Cable length 0.5 m, 1.6'
Cable length 200 cm, 6.6'
Contact breaker
Switch ON (door opened) > 2 cm, 0.8" from the magnet
Switch OFF (door closed) < 1 cm, 0.4" from the magnet
Dust proof and sealed to IP65 (not waterproof )
Color
White
Environment For indoor use only
71
BE9023
BE9026
Maximum ratings
Operation
Contact
N/O normally open
Contact rating
10 VA
Contact resistance
5 kg over a 50 mm diameter disc
Switching current
0.25 Amps DC resistive
Temperature range
-15 to 65 °C, 5 to 149 °F
Carry current
0.25 Amps DC resistive
72